How to remove the Air Bag Control Module on Toyota Sequoia?

The first step to remove the Air Bag Control Module requires disconnection of the negative battery cable followed by a minimum 90-second disablement of the SRS system. A few systems within this procedure might need initialization following the reconnecting of the cable. The service technician must uninstall the front door scuff plate LH, cowl side trim board LH, front door opening trim Weather Strip LH, front pillar garnish LH, instrument side panel LH, hood lock control lever sub-assembly, lower instrument panel finish panel sub-assembly LH, shift lever knob sub-assembly, upper console panel sub-assembly, rear upper console panel sub-assembly, rear console box pocket, console box carpet, rear console box assembly and front console box from the vehicle. After disconnecting the negative battery terminal researchers should pull the lever down to unplug the connector holder before removing the Air Bag sensor assembly by removing 3 bolts.

How to service and repair the Air Bag Control Module on Toyota Sequoia?

The first step to work on the Air Bag Control Module consists of removing four components: shifting lever knob, shifting hole cover, upper console panel and rear console box and front console box. Continue by disconnecting the connectors from the Air Bag sensor assembly while the assembly stays mounted. After that remove its four mounting bolts. You must replace the SRS parts with new ones during installation procedures because you cannot use an Air Bag sensor assembly if it took part in a crash or deployed. The four bolts must be tightened to 20 N.m (205 kgf.cm, 15 ft.lbf) when installing the Air Bag sensor assembly. After assembly installation, connect the Air Bag sensor connectors. Check the sensor assembly torque level while inspecting it for defects like cracks or dents; any evidence of damage requires replacement of the assembly. The SRS wiring needs to be positioned in a way that ensures it avoids different components and checks for loose connections by exerting shaking movements on the sensor assembly. After finishing mount the front console box assembly, rear console box assembly, upper console panel and shifting hole cover and shifting lever knob for 4WD models.

OEM Toyota Sequoia Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Air Bag Control Modules found

View related parts
Toyota Sequoia Air Bag Sensor, Center
Part Number: 89170-0C142
$329.57 MSRP: $404.18
You Save: $74.61 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Impact Sensor, Center; Diagnostic Module
- Position: Center
- Replaces: 89170-0C141, 89170-0C140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Diag Unit W/Sensor
Part Number: 89170-0C490
$404.05 MSRP: $508.62
You Save: $104.57 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Computer Assembly, Air Bag
- Replaces: 89170-0C450, 89170-0C451, 89170-0C452
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2014 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Control Module
Part Number: 89170-0C702
$335.51 MSRP: $411.47
You Save: $75.96 (19%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Computer Assembly, Air Bag
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia SDM Module
Part Number: 89170-0C701
$342.19 MSRP: $430.76
You Save: $88.57 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Computer Assembly, Air Bag
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Diag Unit W/Sensor
Part Number: 89170-0C593
$343.67 MSRP: $432.61
You Save: $88.94 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Air Bag Sensor; Center Sensor; Computer Assembly, Air Bag
- Replaces: 89170-0C591, 89170-0C592, 89170-0C590
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2019 Toyota Sequoia | Limited, Platinum, SR5, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Diag Unit W/Sensor
Part Number: 89170-0C540
$343.67 MSRP: $432.61
You Save: $88.94 (21%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Air Bag Sensor; Center Sensor; Computer Assembly, Air Bag
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Diag Unit W/Sensor
Part Number: 89170-0C500
$363.64 MSRP: $457.75
You Save: $94.11 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Air Bag Sensor; Center Sensor; Computer Assembly, Air Bag
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2018 Toyota Sequoia | Limited, Platinum, SR5, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Diag Unit W/Sensor
Part Number: 89170-0C410
$414.39 MSRP: $521.63
You Save: $107.24 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Air Bag Sensor; Center Sensor; Computer Assembly, Air Bag
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2009 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Diag Unit W/Sensor
Part Number: 89170-0C380
$437.87 MSRP: $551.20
You Save: $113.33 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Air Bag Sensor; Center Sensor; Computer Assembly, Air Bag
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2014 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Air Bag Sensor, Center
Part Number: 89170-0C070
$685.84 MSRP: $863.33
You Save: $177.49 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Impact Sensor, Center; Diagnostic Module
- Manufacturer Note: *80,DRIVER SIDE & PASSENGER SIDE & SIDE
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Air Bag Sensor, Center
Part Number: 89170-0C040
$669.37 MSRP: $842.60
You Save: $173.23 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Impact Sensor, Center; Diagnostic Module
- Manufacturer Note: *80,DRIVER SIDE & PASSENGER SIDE & SIDE
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Air Bag Sensor, Center
Part Number: 89170-0C030
$649.39 MSRP: $817.46
You Save: $168.07 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Impact Sensor, Center; Diagnostic Module
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Control Module, Passenger Side
Part Number: 89952-35020
$381.01 MSRP: $558.37
You Save: $177.36 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Occupant Detection; Air Bag Passenger Presence Module, Front Right, Right; Occupant Detection Sensor; Occupant Sensor; Passenger Discriminating Sensor; Occupant Module; Computer
- Position: Passenger Side
- Replaces: 89952-35010, 89952-35011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Air Bag Sensor, Center
Part Number: 89170-0C130
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Impact Sensor, Center; Diagnostic Module
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS

Toyota Sequoia Air Bag Control Module

Choose genuine Air Bag Control Module that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Air Bag Control Module for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Sequoia Air Bag Control Module Parts and Q&A

Control Module, Passenger Side
89952-35020
Q: How to remove the Air Bag Control Module on Toyota Sequoia?
A:
The first step to remove the Air Bag Control Module requires disconnection of the negative battery cable followed by a minimum 90-second disablement of the SRS system. A few systems within this procedure might need initialization following the reconnecting of the cable. The service technician must uninstall the front door scuff plate LH, cowl side trim board LH, front door opening trim Weather Strip LH, front pillar garnish LH, instrument side panel LH, hood lock control lever sub-assembly, lower instrument panel finish panel sub-assembly LH, shift lever knob sub-assembly, upper console panel sub-assembly, rear upper console panel sub-assembly, rear console box pocket, console box carpet, rear console box assembly and front console box from the vehicle. After disconnecting the negative battery terminal researchers should pull the lever down to unplug the connector holder before removing the Air Bag Sensor assembly by removing 3 bolts.
Air Bag Sensor, Center
89170-0C030
Q: How to service and repair the Air Bag Control Module on Toyota Sequoia?
A:
The first step to work on the Air Bag Control Module consists of removing four components: shifting lever knob, shifting hole cover, upper console panel and rear console box and front console box. Continue by disconnecting the connectors from the Air Bag Sensor assembly while the assembly stays mounted. After that remove its four mounting bolts. You must replace the SRS parts with new ones during installation procedures because you cannot use an Air Bag sensor assembly if it took part in a crash or deployed. The four bolts must be tightened to 20 N.m (205 kgf.cm, 15 ft.lbf) when installing the Air Bag sensor assembly. After assembly installation, connect the Air Bag sensor connectors. Check the sensor assembly torque level while inspecting it for defects like cracks or dents; any evidence of damage requires replacement of the assembly. The SRS wiring needs to be positioned in a way that ensures it avoids different components and checks for loose connections by exerting shaking movements on the sensor assembly. After finishing mount the front console box assembly, rear console box assembly, upper console panel and shifting hole cover and shifting lever knob for 4WD models.