How to install the ABS Control Module with the actuator bracket assembly on Toyota Sequoia?

An installation of the VSC actuator begins by securely fastening the actuator with three nuts under the condition that dropping it will require a new actuator replacement. You must tighten the nuts alphabetically while maintaining an even distribution of force that reaches 22 Nm (224 kgf-cm, 16 ft-lbf). Do not damage the brake lines or wire harness during this process. Install the brake lines correctly on the brake actuator followed by putting on the clamp which should attach to the VSC actuator bracket. Use a union nut wrench to connect all 4 brake tubes applying 15 Nm torque without it or 14 Nm torque when using it while maintaining the wrench parallel to the torque wrench. The installation of brake tubes to the brake master cylinder requires a union nut wrench to tighten each tube at 20 Nm (199 kgf-cm, 14 ft-lbf) without the wrench but with 18 Nm (185 kgf-cm, 13 ft-lbf) torque when using the wrench. Ensure the wrench stays parallel to the torque wrench at all times. Into the torque wrench measure 18 Nm torque for each of the two VSC actuator connected brake tubes. Complete the connection of the VSC actuator connector then add brake fluid into the reservoir followed by purging air from the brake master cylinder, brake line and VSC actuator assembly. To complete the procedure check both the brake fluid level inside the reservoir and thoroughly investigate brake fluid leakage points.

How to remove and replace the ABS control module for the antilock brakes on Toyota Sequoia?

First step to replace or remove the antilock brake hydraulic control assembly requires identification of the brake actuator and its various components. Work with the necessary tools while following the provided procedure for brake work which requires specific attention to brake control mechanisms and dynamic control systems for correct functionality after assembling complete parts.

OEM Toyota Sequoia ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 ABS Control Modules found

View related parts
Toyota Sequoia Control Module
Part Number: 89541-0C070
$515.28 MSRP: $755.14
You Save: $239.86 (32%)
ADD TO CART
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Control Module
Part Number: 89541-0C062
$471.35 MSRP: $690.78
You Save: $219.43 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C593
$922.52 MSRP: $1161.27
You Save: $238.75 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Replaces: 44050-0C590
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C583
$972.68 MSRP: $1224.42
You Save: $251.74 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C370
$874.05 MSRP: $1100.27
You Save: $226.22 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Actuator Assembly
Part Number: 44050-0C371
$843.75 MSRP: $1062.12
You Save: $218.37 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C100
$1170.17 MSRP: $1473.02
You Save: $302.85 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly; Actuator Assembly, ABS & Traction
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C072
$1022.06 MSRP: $1286.57
You Save: $264.51 (21%)
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly; Actuator Assembly, ABS & Traction
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C310
$1047.59 MSRP: $1318.72
You Save: $271.13 (21%)
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C212
$1063.71 MSRP: $1339.01
You Save: $275.30 (21%)
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: REAR SUSPENSION-AIR SUSPENSION
- Replaces: 44050-0C211
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C060
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly; Actuator Assembly, ABS & Traction
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C452
$924.56 MSRP: $1163.84
You Save: $239.28 (21%)
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C442
$853.51 MSRP: $1074.40
You Save: $220.89 (21%)
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C300
$928.99 MSRP: $1169.42
You Save: $240.43 (21%)
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Modulator Valve
Part Number: 44050-0C202
$986.64 MSRP: $1242.00
You Save: $255.36 (21%)
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Replaces: 44050-0C200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Control Module
Part Number: 89541-0C050
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS

Toyota Sequoia ABS Control Module

Choose genuine ABS Control Module that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM ABS Control Module for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

They are among the optimal and widely used in different models of Toyota Sequoia branded in the automotive industry as the ABS Control Module. This module has a very important function in increasing the car safety because it prevents wheel lock during heavy brake application and guarantees precise control of the vehicle and exclude skidding. It works hand in hand with wheel speed sensor, valves, pump, and ECU; thus, monitoring and regulating brake pressure to match wheel speed data, both derived internally. In recent years there has been improvements in antilock braking system through its control module where there is addition of features like the electronic stability control ESC and Traction control, which improved the handling of the Toyota Sequoia by selectively braking specific wheels. It is most advantageous in conditions concerning acceleration and on such roads as rocky ones. Apart from the shorter stopping distances the Toyota Sequoia ABS Control Module also plays a very big role in enhancing the efficiency and safety of the car. Thanks to its applicability for different generations of Toyota Sequoia, this module is notable in the automotive market, where it has been developed due to its rather powerful design and usage of the latest technologies. Due to its reliability and performance, the Toyota Sequoia ABS Control Module is a valuable tool for any driver that wants a reliable full-size SUV that will not give them a hard time regardless of the conditions.

Toyota Sequoia ABS Control Module Parts and Q&A

Modulator Valve
44050-0C202
Q: How to install the ABS Control Module with the actuator bracket assembly on Toyota Sequoia?
A:
An installation of the VSC actuator begins by securely fastening the actuator with three nuts under the condition that dropping it will require a new actuator replacement. You must tighten the nuts alphabetically while maintaining an even distribution of force that reaches 22 Nm (224 kgf-cm, 16 ft-lbf). Do not damage the Brake Lines or wire harness during this process. Install the brake lines correctly on the brake actuator followed by putting on the clamp which should attach to the VSC actuator bracket. Use a union nut wrench to connect all 4 brake tubes applying 15 Nm torque without it or 14 Nm torque when using it while maintaining the wrench parallel to the torque wrench. The installation of brake tubes to the Brake Master Cylinder requires a union nut wrench to tighten each tube at 20 Nm (199 kgf-cm, 14 ft-lbf) without the wrench but with 18 Nm (185 kgf-cm, 13 ft-lbf) torque when using the wrench. Ensure the wrench stays parallel to the torque wrench at all times. Into the torque wrench measure 18 Nm torque for each of the two VSC actuator connected brake tubes. Complete the connection of the VSC actuator connector then add brake fluid into the reservoir followed by purging air from the brake master cylinder, brake line and VSC actuator assembly. To complete the procedure check both the brake fluid level inside the reservoir and thoroughly investigate brake fluid leakage points.
Modulator Valve
44050-0C212
Q: How to remove and replace the ABS control module for the antilock brakes on Toyota Sequoia?
A:
First step to replace or remove the antilock brake hydraulic control assembly requires identification of the brake actuator and its various components. Work with the necessary tools while following the provided procedure for brake work which requires specific attention to brake control mechanisms and dynamic control systems for correct functionality after assembling complete parts.

Related Toyota Sequoia Parts

Browse Toyota Sequoia ABS Control Module by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001