Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2014-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Toyota Sequoia Brake Line
If you're thinking about purchasing OEM parts for your Toyota Sequoia, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia Brake Line at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Toyota Sequoia Brake Line Parts Questions & Experts Answers
Q: How to install the rear Brake Line on Toyota Sequoia?
A: The installation process for the rear brake flexible hose begins by affixing it with three bolts where bolt A requires a torque of 29 Nm (296 kgf-cm, 21 ft-lbf) and bolt B needs 13 Nm (127 kgf-cm, 9 ft-lbf). For brake cylinder attachment use the union bolt to join the flexible hose with its new gasket while applying 30 Nm of torque (306 kgf-cm) (22 ft-lbf). Also confirm the flexible hose lock fits properly into the cylinder lock hole. The flexible hose should be fastened to the brake tube at its designated connection point by using a new clip. A union nut wrench (10 mm) should be used to fasten the flexible hose tubes at 15 Nm (155 kgf-cm, 11 ft-lbf) outside wrench operation and 14 Nm (144 kgf-cm, 10 ft-lbf) within wrench operation after satisfying a 300 mm (11.8 in.) torque wrench fulcrum length requirement and maintaining parallel position of the union wrench and torques. Complete brake fluid addition to the reservoir followed by an air bleeding process from the Brake Master Cylinder and VSC actuator assembly and brake line before checking fluid level and inspecting for fluid leaks and then installing the rear wheel.