How to install the Yaw Sensor on Toyota Sequoia?

The first step in Yaw Rate Sensor installation requires you to join the sensor connector labeled A and apply the clamp labeled B to the sensor bracket hole. Fasten the yaw rate sensor using its 2 nuts (C) which need to be tightened to 13 Nm (127 kgf-cm, 9 ft-lbf). During installation be sure to match the sensor orientation correctly and replace it if it falls to ground and maintain proper connector connection while keeping away from impact. The installation includes the sequence of rear console box assembly followed by console box carpet then rear console box pocket along with rear upper console panel sub-assembly then upper console panel sub-assembly and shift lever knob sub-assembly. The last step includes performing yaw rate sensor zero point calibration and verifying the yaw rate sensor signal.

OEM Toyota Sequoia Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Yaw Sensors found

View related parts
Toyota Sequoia Yaw Rate Sensor
Part Number: 89180-0C030
$538.68 MSRP: $789.45
You Save: $250.77 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Sensor, Yawrate
- Replaces: 89180-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Yaw Rate Sensor
Part Number: 89180-0C060
$791.65 MSRP: $1160.18
You Save: $368.53 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor; Sensor, Yawrate
- Replaces: 89180-0C040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Yaw Rate Sensor
Part Number: 89180-0C010
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Sensor, Yawrate
- Manufacturer Note: PART NUMBER LABEL=89180-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Yaw Rate Sensor
Part Number: 89180-0C070
$791.65 MSRP: $1160.18
You Save: $368.53 (32%)
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor; Sensor, Yawrate
- Replaces: 89180-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

Toyota Sequoia Yaw Sensor

If you're thinking about purchasing OEM parts for your Toyota Sequoia, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia Yaw Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Sequoia Yaw Sensor Parts Questions & Experts Answers

Yaw Rate Sensor
89180-0C060
Q: How to install the Yaw Sensor on Toyota Sequoia?
A: The first step in Yaw Rate Sensor installation requires you to join the sensor connector labeled A and apply the clamp labeled B to the sensor bracket hole. Fasten the yaw rate sensor using its 2 nuts (C) which need to be tightened to 13 Nm (127 kgf-cm, 9 ft-lbf). During installation be sure to match the sensor orientation correctly and replace it if it falls to ground and maintain proper connector connection while keeping away from impact. The installation includes the sequence of rear console box assembly followed by console box carpet then rear console box pocket along with rear upper console panel sub-assembly then upper console panel sub-assembly and shift lever knob sub-assembly. The last step includes performing yaw rate sensor zero point calibration and verifying the yaw rate sensor signal.