How to install the Ignition Switch or starter switch assembly on Toyota Sequoia?

You must first install two assembly claws in the internal components followed by attaching the ignition or starter switch assembly connector. After the installation of the lower steering column cover proceed. The proper procedures for steering column assembly installation must be used to customize information about the power tilt and power telescopic features.

How to remove the ignition switch on Toyota Sequoia?

You must customize information about the Power Tilt and Power Telescopic Steering Column before starting the procedure to remove the ignition switch of the 2UZ-FE starting system. Take out the steering column cover located at the bottom position. You must disconnect the ignition or starter switch assembly connector followed by removing its two claws to pull out the ignition or starter switch assembly.

OEM Toyota Sequoia Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ignition Switches found

View related parts
Toyota Sequoia Position Sensor
Part Number: 84052-71010
$65.52 MSRP: $91.97
You Save: $26.45 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Switch; Steering Lock; Angle Sensor; Multi Purpose Switch; Lock Switch; Switch Assembly; Warning Switch; Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2020 Toyota Sequoia | Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Switch Assembly, Un-Lock Warning
Part Number: 84052-33040
$33.57 MSRP: $46.72
You Save: $13.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Ignition Switch
Part Number: 84450-71010
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2020 Toyota Sequoia | Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Ignition Switch
Part Number: 84450-52010
$113.75 MSRP: $159.67
You Save: $45.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter
- Replaces: 84450-BZ040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS

Toyota Sequoia Ignition Switch

Choose genuine Ignition Switch that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Ignition Switch for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Sequoia Ignition Switch Parts and Q&A

Position Sensor
84052-71010
Q: How to install the Ignition Switch or starter switch assembly on Toyota Sequoia?
A:
You must first install two assembly claws in the internal components followed by attaching the ignition or starter switch assembly connector. After the installation of the lower steering column cover proceed. The proper procedures for steering column assembly installation must be used to customize information about the power tilt and power telescopic features.
Ignition Switch
84450-71010
Q: How to remove the ignition switch on Toyota Sequoia?
A:
You must customize information about the Power Tilt and Power Telescopic Steering Column before starting the procedure to remove the ignition switch of the 2UZ-FE starting system. Take out the steering column cover located at the bottom position. You must disconnect the ignition or starter switch assembly connector followed by removing its two claws to pull out the ignition or starter switch assembly.