How to install the turn signal flasher assembly on Toyota Sequoia?

Installation of the turn signal flasher assembly requires being fastened with a nut and connecting the connector. Then fit the lower instrument panel finish panel LH, instrument side panel LH and cowl side trim board LH. Lastly, put in place the front door scuff plate LH in the same process.

How to remove the Turn Signal Flasher Assembly on Toyota Sequoia?

To remove the Turn Signal Flasher Assembly, first take off the front door scuff plate LH, cowl side trim board LH, instrument side panel LH, and lower instrument panel finish panel sub-assembly LH. Then, disconnect the connector and remove the nut and flasher assembly.

OEM Toyota Sequoia Turn Signal Flasher

Turn Signal Indicator Flasher

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Turn Signal Flashers found

View related parts
Toyota Sequoia Turn Signal Flasher
Part Number: 81980-34020
$66.94 MSRP: $93.96
You Save: $27.02 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flasher Assembly, Turn Signal
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Flasher Relay
Part Number: 81980-0C020
$85.55 MSRP: $120.08
You Save: $34.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flasher Assembly, Turn Signal; Hazard Warning and Turn Signal Flasher; Hazard Warning Flasher; Accessory Delay Relay; Turn Signal Flasher; Flasher; Flasher, Turn Signal
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2015 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Flasher Relay
Part Number: 81980-0C010
$70.61 MSRP: $99.11
You Save: $28.50 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flasher Assembly, Turn Signal; Hazard Warning and Turn Signal Flasher; Hazard Warning Flasher; Accessory Delay Relay; Turn Signal Flasher; Flasher; Flasher, Turn Signal
- Manufacturer Note: DAYTIME RUNNING LIGHT SYSTEM-WITH
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

Toyota Sequoia Turn Signal Flasher

If you're thinking about purchasing OEM parts for your Toyota Sequoia, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia Turn Signal Flasher at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Sequoia Turn Signal Flasher Parts and Q&A

Flasher Relay
81980-0C010
Q: How to install the turn signal flasher assembly on Toyota Sequoia?
A: Installation of the turn signal flasher assembly requires being fastened with a nut and connecting the connector. Then fit the lower instrument panel finish panel LH, instrument side panel LH and cowl side trim board LH. Lastly, put in place the front door scuff plate LH in the same process.
Flasher Relay
81980-0C020
Q: How to remove the Turn Signal Flasher Assembly on Toyota Sequoia?
A: To remove the Turn Signal Flasher Assembly, first take off the front door scuff plate LH, cowl side trim board LH, instrument side panel LH, and lower instrument panel finish panel sub-assembly LH. Then, disconnect the connector and remove the nut and flasher assembly.