Other Name: Master Switch Assembly; Door Window Switch, Front Left; Master Switch Assembly, Power Window Regulator
Manufacturer Note: PLATINUM
Position: Front Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Switch Assembly, Power Window Regulator; Switch; Switch Assembly, Back Door Power Window Regulator
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Switch Assembly, Power Window Regulator; Door Window Switch, Front Right, Rear, Right; Switch Assembly, Power Window Regulator, Rear
Position: Rear
Replaces: 84810-0D030, 84810-52030, 84810-02050
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Switch Assembly, Power Window Regulator; Door Window Switch, Front Right, Rear
Manufacturer Note: PLATINUM
Position: Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
| Page 1 of 2 |Next >
1-20 of 22 Results
Toyota Sequoia Power Window Switch
If you're thinking about purchasing OEM parts for your Toyota Sequoia, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia Power Window Switch at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to remove the rear power window switch on Toyota Sequoia?
A: In order to remove the rear power window switch, repeat the steps on the RH and LH sides, but in this case, the LH side. Begin by removing the top panel of the armrest base of the rear door. Next, loosen the two claws with a screwdriver with taped tip to loosen the screwdriver and pull out the rear power window regulator switch assembly.
Q: How to remove the back door power window switch on Toyota Sequoia?
A: To remove the back door power window switch, start by using a moulding remover to detach the 4 claws and extract the No. 2 switch hole base. Then, release the 2 claws to take out the back door power window regulator switch assembly.