How to install the Brake Light Switch assembly on Toyota Sequoia?

The first step to install the stop light switch assembly requires placing the stop light switch inside the adjuster until the assembly barely contacts the brake pedal without triggering it. Follow this step by turning the switch in a clockwise direction by a quarter turn yet maintain the brake pedal untouched throughout installation. The torque specification when tightening the stop light switch should be limited to 1.5 Nm (15 kgf-cm, 13 in-lbf). Technical evaluations of stop light switch clearance must happen after installation to confirm distances fall between 0.5 to 2.6 mm (0.020 to 0.102 in.). Then connect the stop light switch connector to the stop light switch.

OEM Toyota Sequoia Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Light Switches found

View related parts
Toyota Sequoia Stoplamp Switch
Part Number: 84340-09310
$16.73 MSRP: $23.29
You Save: $6.56 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Stop Lamp; Brake Light Switch; Stoplight Switch
- Replaces: 84340-09040, 84340-09070, 84340-79015, 84340-09041, 84340-19026, 84340-19025
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Switch Assembly, Stop Lamp
Part Number: 84340-09291
$37.03 MSRP: $51.54
You Save: $14.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Light Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Stoplamp Switch
Part Number: 84340-34010
$85.78 MSRP: $120.42
You Save: $34.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Stop Lamp; Brake Light Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS

Toyota Sequoia Brake Light Switch

Choose genuine Brake Light Switch that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Brake Light Switch for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Another important component on the Toyota Sequoia is the Brake Light Switch since it controls the brake lights as well as the pedal is steps on. This mechanism enables the drivers at the rear of the Sequoia of the status of the car, if it is slowing down or has come to a standstill, thus increasing the safety on the roads. Although, there isn't a differentiation of the types or styles of Brake Light Switch for use in different models of Sequoia, the basic functioning stays the same. It is now shocking to note that the performance of the Brake Light Switch plays a significant role to ensure other motorists are informed of the car's state thereby enhancing safety on the road.

Toyota Sequoia Brake Light Switch Parts and Q&A

Stoplamp Switch
84340-09310
Q: How to install the Brake Light Switch assembly on Toyota Sequoia?
A:
The first step to install the stop light switch assembly requires placing the stop light switch inside the adjuster until the assembly barely contacts the brake pedal without triggering it. Follow this step by turning the switch in a clockwise direction by a quarter turn yet maintain the brake pedal untouched throughout installation. The torque specification when tightening the stop light switch should be limited to 1.5 Nm (15 kgf-cm, 13 in-lbf). Technical evaluations of stop light switch clearance must happen after installation to confirm distances fall between 0.5 to 2.6 mm (0.020 to 0.102 in.). Then connect the stop light switch connector to the stop light switch.