How to install the rear Brake Line on 2008 Toyota Yaris?

Installation of the rear brake flexible hose begins with fitting the flexible hose through two new clips which must be mounted onto the axle beam. During this installation use Special Service Tool: 09023-00100 to tighten the 2 brake tubes onto the flexible hose at 15 Nm (155 kgf-cm, 11 ft-lbf) torque when not using the tool or 14 Nm (143 kgf-cm, 10 ft-lbf) with the tool while using a torque wrench measuring 300 mm (11.81 in.) and aligning the tool parallel to the wrench. Brake fluid must be added to the reservoir while you perform master cylinder bleeding and brake line bleeding before inspecting the reservoir fluid level. Brake fluid leakage should be checked after completing these procedures before using 103 Nm of torque (1,050 kgf-cm, 76 ft-lbf) to install the rear wheel.

OEM 2008 Toyota Yaris Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Lines found

View related parts
2008 Toyota Yaris Flex Hose, Rear Driver Side
Part Number: 90947-02E10
$43.56 MSRP: $60.63
You Save: $17.07 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left, Rear Left Inner; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Manufacturer Note: PAINTED=PINK
- Position: Rear Driver Side
- Part Name Code: 47319F
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.4 x 6.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02E10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris Flex Hose, Driver Side
Part Number: 90947-02E08
$77.37 MSRP: $108.61
You Save: $31.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Driver Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.2 x 6.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02E08
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris Flex Hose, Passenger Side
Part Number: 90947-02E07
$77.37 MSRP: $108.61
You Save: $31.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Passenger Side
- Part Name Code: 47313A
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.4 x 6.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02E07
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS

2008 Toyota Yaris Brake Line

Looking for affordable OEM 2008 Toyota Yaris Brake Line? Explore our comprehensive catalogue of genuine 2008 Toyota Yaris Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Yaris Parts Questions & Experts Answers

Q: How to install the rear Brake Line on 2008 Toyota Yaris?
A: Installation of the rear brake flexible hose begins with fitting the flexible hose through two new clips which must be mounted onto the axle beam. During this installation use Special Service Tool: 09023-00100 to tighten the 2 brake tubes onto the flexible hose at 15 Nm (155 kgf-cm, 11 ft-lbf) torque when not using the tool or 14 Nm (143 kgf-cm, 10 ft-lbf) with the tool while using a torque wrench measuring 300 mm (11.81 in.) and aligning the tool parallel to the wrench. Brake fluid must be added to the reservoir while you perform master cylinder bleeding and brake line bleeding before inspecting the reservoir fluid level. Brake fluid leakage should be checked after completing these procedures before using 103 Nm of torque (1,050 kgf-cm, 76 ft-lbf) to install the rear wheel.