Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
Position: Front Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2014-2015 Toyota Yaris | L, LE, SE | 4 Cyl 1.5 L GAS
Toyota Yaris Brake Line
If you're thinking about purchasing OEM parts for your Toyota Yaris, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Yaris Brake Line at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Toyota Yaris Brake Line Parts Questions & Experts Answers
Q: How to install the front Brake Line on Toyota Yaris?
A: The procedure to install the front brake flexible hose starts with attaching it to the union bolt and new gasket then tightening to 30 Nm (310 kgf-cm, 22 ft-lbf). When installing the flexible hose with Speed Sensor on ABS vehicles use the bolt that requires a torque force of 29 Nm (300 kgf-cm, 22 ft-lbf) and refrain from allowing the bolt to twist. Vehicles without ABS need the flexible hose bolted with this torque setting of 29 Nm (300 kgf-cm, 22 ft-lbf) and must prevent hose twisting during installation. Fasten the new clip using a union nut wrench to secure the brake tube while applying force of 15 Nm (155 kgf-cm, 11 ft-lbf) when not using the wrench or 14 Nm (144 kgf-cm, 10 ft-lbf) when using it. When applying these torques we should use a 300 mm (11.8 in.) long torque wrench together with a parallel-positioned 22 mm (0.866 in.) union nut wrench. Post-installation requires filling the brake reservoir while performing master cylinder bleeding followed by brake line bleeding and checking the reservoir fluid level before examining for brake fluid leakage. Complete the front wheel attachment process by tightening it to 103 Nm (1,050 kgf-cm, 76 ft-lbf).