My Garage
Cart
Make sure this part fits

Toyota 90947-02E10
Flex Hose, Rear Driver Side

2007-2014 Toyota 9094702E10

Customer Questions & Expert Answers (11)
Toyota 90947-02E10 Flex Hose, Rear Driver Side
  • Part Description
    Hose, Flexible; Brake Hydraulic Hose, Rear Left, Rear Left Inner; Brake Hose; Brake Line
  • Part Name Code
    47319F
  • Comment
    (FOR REAR LH)
  • Position
    Rear Driver Side
  • Manufacturer
    Toyota
Make sure this part fits
$43.56 MSRP: $60.63
You Save: $17.07 (29%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code47319F
    Manufacturer Part Number90947-02E10
    Part DescriptionHose, Flexible; Brake Hydraulic Hose, Rear Left, Rear Left Inner; Brake Hose; Brake Line
    Other NamesHose, Flexible(For Rear Driver Side); Hydraulic Hose
    Manufacturer NotePAINTED=PINK
    Item Dimensions7.4 x 6.2 x 1.6 inches
    Item Weight0.70 Pounds
    PositionRear Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU90947-02E10
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2011 Scion xDBase4 Cyl 1.8 L GAS
    2007-2014 Toyota YarisBase, L, LE, S, SE4 Cyl 1.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will 90947-02E10 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 90947-02E10 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the torque specification without a union nut wrench for the 2009 Scion xD? Posted by Customer
    A:
    The torque should be 15 Nm (155 kgf-cm, 11 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake tubes for the 2010 Scion xD? Posted by Customer
    A:
    Fill the reservoir with brake fluid, bleed the master cylinder, bleed the brake line, and bleed the brake actuator.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    Q:
    How do you attach the flexible hose and speed sensor for the 2010 Scion xD? Posted by Customer
    A:
    Use a bolt and apply a torque of 29 Nm (300 kgf-cm, 22 ft-lbf) while avoiding any twisting of the components.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    Q:
    How do you attach the brake tubes to the flexible hose for the 2008 Scion xD? Posted by Customer
    A:
    Using a union nut wrench, attach the 2 brake tubes to the flexible hose while holding the flexible hose with a wrench.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step in the installation process for the 2009 Scion xD? Posted by Customer
    A:
    Install the front wheel with a torque of 103 Nm (1050 kgf-cm, 76 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    Q:
    What is the required torque for connecting the brake tubes with the union nut wrench for the 2009 Toyota Yaris? Posted by Customer
    A:
    14 Nm (144 kgf-cm, 10 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    Q:
    What tool is used to install the brake tubes onto the flexible hose for the 2008 Toyota Yaris? Posted by Customer
    A:
    Special Service Tool: 09023-00100.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    Q:
    How can the required torque be achieved for the 2010 Toyota Yaris? Posted by Customer
    A:
    This torque can be achieved using a torque wrench with a fulcrum length of 300 mm (11.8 in.) and a union nut wrench with a fulcrum length of 22 mm (0.866 in.), ensuring the union nut wrench is parallel to the torque wrench.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    Q:
    How do you remove the rear brake flexible hose for the 2007 Toyota Yaris? Posted by Customer
    A:
    Use Special Service Tool: 09023-00100 to separate the brake tubes, then take off the 2 clips and the flexible hose from the axle beam.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after the installation for the 2009 Toyota Yaris? Posted by Customer
    A:
    Fill the reservoir with brake fluid, bleed the master cylinder, bleed the brake line, check the fluid level in the reservoir, and inspect for any brake fluid leakage.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 90947-02E10, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 90947-02E10 Flex Hose, Rear Driver Side. It is sometimes referred to as Toyota Brake Line, Toyota Hydraulic Hose. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 9094702E10 Flex Hose, Rear Driver Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery