My Garage
Cart

OEM 2009 Toyota Yaris Brake Line

Brake Hose
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Lines found

  • 2009 Toyota Yaris Brake Line - 90947-02E10
    2009 Toyota Yaris Brake Line Diagram - 90947-02E10
    View related parts

    2009 Toyota Yaris Flex Hose, Rear Driver Side

    Part Number: 90947-02E10
    $46.71 MSRP: $65.02
    You Save: $18.31 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left, Rear Left Inner; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
    • Manufacturer Note: PAINTED=PINK
    • Position: Rear Driver Side
    • Part Name Code: 47319F
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 7.4 x 6.2 x 1.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90947-02E10
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Toyota Yaris Submodels:
    • Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
  • 2009 Toyota Yaris Brake Line - 90947-02E08
    2009 Toyota Yaris Brake Line Diagram - 90947-02E08
    View related parts

    2009 Toyota Yaris Flex Hose, Driver Side

    Part Number: 90947-02E08
    $82.82 MSRP: $116.25
    You Save: $33.43 (29%)
    Product Specifications
    • Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
    • Position: Driver Side
    • Item Weight: 0.90 Pounds
    • Item Dimensions: 7.2 x 6.2 x 1.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90947-02E08
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Toyota Yaris Submodels:
    • Base, S | 4 Cyl 1.5 L GAS
  • 2009 Toyota Yaris Brake Line - 90947-02E07
    2009 Toyota Yaris Brake Line Diagram - 90947-02E07
    View related parts

    2009 Toyota Yaris Flex Hose, Passenger Side

    Part Number: 90947-02E07
    $82.82 MSRP: $116.25
    You Save: $33.43 (29%)
    Product Specifications
    • Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
    • Position: Passenger Side
    • Part Name Code: 47313A
    • Item Weight: 0.90 Pounds
    • Item Dimensions: 7.4 x 6.1 x 1.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90947-02E07
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Toyota Yaris Submodels:
    • Base, S | 4 Cyl 1.5 L GAS

2009 Toyota Yaris Brake Line

Looking for affordable OEM 2009 Toyota Yaris Brake Line? Explore our comprehensive catalogue of genuine 2009 Toyota Yaris Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Yaris Brake Line Parts Q&A

  • Q: How to install the front Brake Line on 2009 Toyota Yaris?
    A: The procedure to install the front brake flexible hose starts with attaching it to the union bolt and new gasket then tightening to 30 Nm (310 kgf-cm, 22 ft-lbf). When installing the flexible hose with speed sensor on ABS vehicles use the bolt that requires a torque force of 29 Nm (300 kgf-cm, 22 ft-lbf) and refrain from allowing the bolt to twist. Vehicles without ABS need the flexible hose bolted with this torque setting of 29 Nm (300 kgf-cm, 22 ft-lbf) and must prevent hose twisting during installation. Fasten the new clip using a union nut wrench to secure the brake tube while applying force of 15 Nm (155 kgf-cm, 11 ft-lbf) when not using the wrench or 14 Nm (144 kgf-cm, 10 ft-lbf) when using it. When applying these torques we should use a 300 mm (11.8 in.) long torque wrench together with a parallel-positioned 22 mm (0.866 in.) union nut wrench. Post-installation requires filling the brake reservoir while performing master cylinder bleeding followed by brake line bleeding and checking the reservoir fluid level before examining for brake fluid leakage. Complete the front wheel attachment process by tightening it to 103 Nm (1,050 kgf-cm, 76 ft-lbf).