How to install the rear Brake Line on 2010 Toyota Yaris?

The rear brake flexible hose installation requires fixing 2 new clips onto the axle beam followed by using a union nut wrench for brake tube connections. The installation begins with attaching two brake tubes to the flexible hose through a union nut wrench while maintaining either 15 Nm or 14 Nm torque depending on whether the union nut wrench is present or not. This torque can be achieved by using a torque wrench with 300 mm (11.8 in.) length and a 22 mm (0.866 in.) union nut wrench which must remain parallel with the torque wrench. Start by filling the brake fluid reservoir and proceed with bleeding the master cylinder followed by bleeding the brake line until fluid flow becomes clear and then bleeding the brake actuator with VSC enabled. The brake fluid reservoir requires a fluid check followed by examination for leakage points. Install the rear wheel by tightening it to 103 Nm (1,050 kgf-cm, 76 ft-lbf).

OEM 2010 Toyota Yaris Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Lines found

View related parts
2010 Toyota Yaris Flex Hose, Rear Driver Side
Part Number: 90947-02E10
$43.56 MSRP: $60.63
You Save: $17.07 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left, Rear Left Inner; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Manufacturer Note: PAINTED=PINK
- Position: Rear Driver Side
- Part Name Code: 47319F
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.4 x 6.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02E10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
View related parts
2010 Toyota Yaris Flex Hose, Driver Side
Part Number: 90947-02E08
$77.37 MSRP: $108.61
You Save: $31.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Driver Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.2 x 6.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02E08
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2010 Toyota Yaris Flex Hose, Passenger Side
Part Number: 90947-02E07
$77.37 MSRP: $108.61
You Save: $31.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Passenger Side
- Part Name Code: 47313A
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.4 x 6.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-02E07
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS

2010 Toyota Yaris Brake Line

Looking for affordable OEM 2010 Toyota Yaris Brake Line? Explore our comprehensive catalogue of genuine 2010 Toyota Yaris Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Yaris Parts Questions & Experts Answers

Q: How to install the rear Brake Line on 2010 Toyota Yaris?
A: The rear brake flexible hose installation requires fixing 2 new clips onto the axle beam followed by using a union nut wrench for brake tube connections. The installation begins with attaching two brake tubes to the flexible hose through a union nut wrench while maintaining either 15 Nm or 14 Nm torque depending on whether the union nut wrench is present or not. This torque can be achieved by using a torque wrench with 300 mm (11.8 in.) length and a 22 mm (0.866 in.) union nut wrench which must remain parallel with the torque wrench. Start by filling the brake fluid reservoir and proceed with bleeding the master cylinder followed by bleeding the brake line until fluid flow becomes clear and then bleeding the brake actuator with VSC enabled. The brake fluid reservoir requires a fluid check followed by examination for leakage points. Install the rear wheel by tightening it to 103 Nm (1,050 kgf-cm, 76 ft-lbf).