How to install the rear axle hub and Wheel Bearing assembly on 2008 Toyota Yaris?

Install the axle hub by placing it onto the beam with 4 bolts that require a torque value of 90 Nm (918 kgf-cm, 67 ft-lbf). Check the rear axle hub bearing as a part of the equipment inspection. Vehicles with ABS require the installation of the skid control sensor wire connector. You should install the rear brake drum sub-assembly before adjusting the rear drum brake shoe clearance. Use a torque wrench to tighten the rear wheel to a value of 103 Nm (1,050 kgf-cm, 76 ft-lbf). Connect the cable to the negative battery terminal while torquing it to 5.4 Nm pressure equivalent to 55 kgf-cm or 48 in-lbf. Conclude the inspection by checking the ABS sensor signal in vehicles that come with ABS technology.

OEM 2008 Toyota Yaris Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
2008 Toyota Yaris Hub Assembly, Rear
Part Number: 42450-52061
$212.10 MSRP: $302.83
You Save: $90.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub&Bearing Assembly, Rear Axle; Wheel Bearing & Hub Assembly, Rear Left/Right; Wheel Hub Repair Kit; Rear Hub & Bearing; Hub & Bearing Assembly, Rear Axle, Passenger & Driver Side; Wheel Bearing
- Position: Rear
- Replaces: 42450-74020, 42450-52060
- Item Weight: 6.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42450-52061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris Hub Assembly
Part Number: 42410-52070
$175.90 MSRP: $251.14
You Save: $75.24 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub&Bearing Assembly; Rear Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Hub & Bearing Assembly; Rear Axle, Passenger & Driver Side; Wheel Bearing and Hub Assembly.
- Item Weight: 6.30 Pounds
- Item Dimensions: 6.1 x 6.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42410-52070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris Wheel Hub, Front
Part Number: 43502-52030
$115.53 MSRP: $162.16
You Save: $46.63 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Wheel Hub Repair Kit; Front Hub; Hub; Hub Sub-Assembly, Front Axle, Passenger Side; Hub Sub-Assembly, Front Axle, Driver Side
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.7 x 6.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43502-52030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS

2008 Toyota Yaris Wheel Bearing

Looking for affordable OEM 2008 Toyota Yaris Wheel Bearing? Explore our comprehensive catalogue of genuine 2008 Toyota Yaris Wheel Bearing. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Yaris Parts Questions & Experts Answers

Q: How to install the rear axle hub and Wheel Bearing assembly on 2008 Toyota Yaris?
A: Install the axle hub by placing it onto the beam with 4 bolts that require a torque value of 90 Nm (918 kgf-cm, 67 ft-lbf). Check the rear axle hub bearing as a part of the equipment inspection. Vehicles with ABS require the installation of the skid control sensor wire connector. You should install the rear brake drum sub-assembly before adjusting the rear drum brake shoe clearance. Use a torque wrench to tighten the rear wheel to a value of 103 Nm (1,050 kgf-cm, 76 ft-lbf). Connect the cable to the negative battery terminal while torquing it to 5.4 Nm pressure equivalent to 55 kgf-cm or 48 in-lbf. Conclude the inspection by checking the ABS sensor signal in vehicles that come with ABS technology.