How to remove the rear Sway Bar Kit on 2008 Toyota Highlander?

The removal process starts with taking off wheels of 2WD vehicles before you proceed to detach the rear sway bar kit. The rear sway bar link assembly LH can be detached by removing the nut then disassembling it from the rear sway bar kit while utilizing a hexagon wrench (5 mm) to maintain the stud bolt in place when the ball joint rotates with the nut. The same hexagon wrench technique allows you to remove the nut leading to the extraction of the rear sway bar link assembly LH from the rear shock absorber with coil spring LH. The same process should be applied to maintain the rear sway bar link assembly RH. Begin by removing the four sway bar kit bolts until the rear No. 1 sway bar bracket for the LH side can be detached. Proceed identically to install the rear No. 1 sway bar bracket on the right-hand side. First end your work by taking out the rear sway bar bushing from the LH side before moving to the RH side.

OEM 2008 Toyota Highlander Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Kits found

View related parts
2008 Toyota Highlander Stabilizer Bar, Rear
Part Number: 48805-48140
$106.16 MSRP: $149.02
You Save: $42.86 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar; Bar, Stabilizer, Rear
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.30 Pounds
- Item Dimensions: 42.8 x 9.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48805-48140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Bar, Stabilizer, Front
Part Number: 48811-0E040
$210.15 MSRP: $300.06
You Save: $89.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Sway Bar
- Position: Front
- Replaces: 48811-48130
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 44.7 x 12.2 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid Limited, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Stabilizer Bar, Front
Part Number: 48811-0E030
$210.15 MSRP: $300.06
You Save: $89.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Replaces: 48811-48120
- Part Name Code: 48811
- Item Weight: 7.70 Pounds
- Item Dimensions: 44.6 x 12.5 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-0E030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Stabilizer Bar, Rear
Part Number: 48812-48170
$79.86 MSRP: $112.09
You Save: $32.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 4.90 Pounds
- Item Dimensions: 42.4 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-48170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Highlander Sway Bar Kit

Looking for affordable OEM 2008 Toyota Highlander Sway Bar Kit? Explore our comprehensive catalogue of genuine 2008 Toyota Highlander Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Highlander Parts Questions & Experts Answers

Q: How to remove the rear Sway Bar Kit on 2008 Toyota Highlander?
A: The removal process starts with taking off wheels of 2WD vehicles before you proceed to detach the rear sway bar kit. The rear sway bar link assembly LH can be detached by removing the nut then disassembling it from the rear sway bar kit while utilizing a hexagon wrench (5 mm) to maintain the stud bolt in place when the ball joint rotates with the nut. The same hexagon wrench technique allows you to remove the nut leading to the extraction of the rear sway bar link assembly LH from the rear shock absorber with coil spring LH. The same process should be applied to maintain the rear sway bar link assembly RH. Begin by removing the four sway bar kit bolts until the rear No. 1 sway bar bracket for the LH side can be detached. Proceed identically to install the rear No. 1 sway bar bracket on the right-hand side. First end your work by taking out the rear sway bar bushing from the LH side before moving to the RH side.