×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota Highlander Suspension Strut Rod
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Suspension Strut Rods found
2008 Toyota Highlander Trailing Arm, Rear
Part Number: 48780-48081$129.71 MSRP: $183.62You Save: $53.91 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Strut Rod; Torque Arm; Strut Rod; Suspension Trailing Arm
- Position: Rear
- Replaces: 48780-48080
- Part Name Code: 48780A
- Item Weight: 3.30 Pounds
- Item Dimensions: 23.4 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-48081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Highlander Trailing Arm, Rear
Part Number: 48780-48070$110.90 MSRP: $155.67You Save: $44.77 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Strut Rod; Torque Arm; Strut Rod; Suspension Trailing Arm
- Position: Rear
- Replaces: 48780-48100
- Part Name Code: 48780A
- Item Weight: 3.00 Pounds
- Item Dimensions: 23.4 x 2.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-48070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Highlander Suspension Strut Rod
Looking for affordable OEM 2008 Toyota Highlander Suspension Strut Rod? Explore our comprehensive catalogue of genuine 2008 Toyota Highlander Suspension Strut Rod. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Highlander Suspension Strut Rod Parts Q&A
- Q: How to install the rear Suspension Strut Rod assembly for 2WD and 4WD vehicles on 2008 Toyota Highlander?A: The installation of the rear strut rod assembly for 2WD begins with identifying the marked inner side of the vehicle. The assembly can be fastened with 2 bolts and 2 nuts but should not be fully tightened because stopper nuts will be used later. For 4WD, follow the same procedure. When stabilizing either the 2WD or 4WD suspension system follow the necessary procedures. The installation of rear strut rod assembly requires fully tightening 2 bolts to 80 Nm (815 kgf-cm, 59 ft-lbf) constraints when working at standard vehicle height. The 4WD bolts must reach their specified torque value but only under normal vehicle height conditions. The installation of the No. 3 parking brake cable assembly consists of a bolt and a nut where the bolt needs 39 Nm (397 kgf-cm, 29 ft-lbf) torque and the nut requires 6.0 Nm (61 kgf-cm, 53 in-lbf) while avoiding cable twisting during the process. You must install the rear wheel by tightening it to 103 Nm (1050 kgf-cm, 76 ft-lbf).