Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Item Weight: 1.40 Pounds
Item Dimensions: 4.7 x 2.9 x 2.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89173-39375
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
Position: Rear
Item Weight: 0.60 Pounds
Item Dimensions: 4.5 x 2.6 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89831-33020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Sensor, Seat Position Air Bag
Position: Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.1 x 1.5 x 1.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Scion xD Submodels:
Base | 4 Cyl 1.8 L GAS
2008 Scion xD Air Bag Sensor
Looking for affordable OEM 2008 Scion xD Air Bag Sensor? Explore our comprehensive catalogue of genuine 2008 Scion xD Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Scion xD Air Bag Sensor Parts Q&A
Q: How to safely remove the front Air Bag sensor on 2008 Scion xD?
A: Before beginning the process of removing the front Air Bag sensor it is essential to disconnect the cable from the negative battery terminal for safety reasons because service operations can affect the SRS Air Bag system. Remove the front bumper cover as the next step in the procedure. The negative battery terminal must stay unconnected for the duration of the work since contact to the Air Bag sensor from any force could trigger a deployment. The front Air Bag sensor can be detached by first removing its securing bolts followed by disconnecting the linking 2 claws. The protocol requires you to disconnect the Air Bag connector by sliding the CPA backward while pushing the housing equipment while avoiding traction on the wire harness and upper CPA housing. Check that the CPA extends past the rear section of the housing after disconnecting it.