How to service the spark plugs on 2008 Scion xD?

Start spark plug service by lifting the No. 2 cylinder head cover from the rear to unfasten its 2 fittings and then lift the front to disengage the last 2 fittings before complete removal. Keep the rubber grommets intact during the cover removal process. Any grommets on the bolts should be transferred to the cover. Begin the procedure by disconnecting both the camshaft timing oil control valve connector and the 4 ignition coil connectors. After that disconnect the 4 bolts and 4 ignition coils. Finally, remove the 4 spark plugs.

OEM 2008 Scion xD Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Spark Plug found

View related parts
2008 Scion xD Plug, Spark
Part Number: 90919-01275
$13.01 MSRP: $18.11
You Save: $5.10 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spark Plug
- Replaces: 90919-01253
- Part Name Code: 19100P
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 90919-01275
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2008 Scion xD Spark Plug

Looking for affordable OEM 2008 Scion xD Spark Plug? Explore our comprehensive catalogue of genuine 2008 Scion xD Spark Plug. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xD Parts Questions & Experts Answers

Q: How to service the spark plugs on 2008 Scion xD?
A: Start spark plug service by lifting the No. 2 cylinder head cover from the rear to unfasten its 2 fittings and then lift the front to disengage the last 2 fittings before complete removal. Keep the rubber grommets intact during the cover removal process. Any grommets on the bolts should be transferred to the cover. Begin the procedure by disconnecting both the camshaft timing oil control valve connector and the 4 ignition coil connectors. After that disconnect the 4 bolts and 4 ignition coils. Finally, remove the 4 spark plugs.