How to install the camshaft position sensor on 2008 Scion xD?

Before installing the camshaft position sensor you need to coat its O-ring with oil. Install the sensor using the bolt meant for the intake camshaft side and tighten it to 10 Nm (102 kgf-cm, 7 ft-lbf). Install the sensor along with its exhaust camshaft bolt while reaching a torque level of 10 Nm (102 kgf-cm, 7 ft-lbf). Attach the 3 engine wire harness clamps while connecting the duty vacuum switching connector for the exhaust camshaft side. After leak inspection should follow the installation of the No.2 cylinder head cover.

OEM 2008 Scion xD Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2008 Scion xD Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Part Name Code: 11101E
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 3
- SKU: 90919-T5005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2008 Scion xD Camshaft Position Sensor

Looking for affordable OEM 2008 Scion xD Camshaft Position Sensor? Explore our comprehensive catalogue of genuine 2008 Scion xD Camshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xD Parts Questions & Experts Answers

Q: How to install the camshaft position sensor on 2008 Scion xD?
A: Before installing the camshaft position sensor you need to coat its O-ring with oil. Install the sensor using the bolt meant for the intake camshaft side and tighten it to 10 Nm (102 kgf-cm, 7 ft-lbf). Install the sensor along with its exhaust camshaft bolt while reaching a torque level of 10 Nm (102 kgf-cm, 7 ft-lbf). Attach the 3 engine wire harness clamps while connecting the duty vacuum switching connector for the exhaust camshaft side. After leak inspection should follow the installation of the No.2 cylinder head cover.