How to remove the Camshaft Position Sensor on Scion xD?

The first step for Camshaft Position Sensor removal from the 2ZR-FE engine control system is removing the No. 2 cylinder head cover. The first step is disconnecting the duty vacuum switching valve connector then removing the three engine wire harness clamps on the exhaust camshaft side. Start by removing both bolts that secure the camshaft position sensor at the exhaust camshaft side and the intake camshaft side respectively.

OEM Scion xD Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
Scion xD Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2014 Scion xD | Base | 4 Cyl 1.8 L GAS

Scion xD Camshaft Position Sensor

If you're thinking about purchasing OEM parts for your Scion xD, our website is your one-stop destination. We stock an extensive selection of genuine Scion xD Camshaft Position Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Scion xD Camshaft Position Sensor Parts Questions & Experts Answers

Camshaft Position Sensor, Driver Side
90919-T5005
Q: How to remove the Camshaft Position Sensor on Scion xD?
A: The first step for Camshaft Position Sensor removal from the 2ZR-FE engine control system is removing the No. 2 cylinder head cover. The first step is disconnecting the duty vacuum switching valve connector then removing the three engine wire harness clamps on the exhaust camshaft side. Start by removing both bolts that secure the camshaft position sensor at the exhaust camshaft side and the intake camshaft side respectively.