How to remove the heated oxygen sensor on Scion xD?

To remove the heated oxygen sensor from the 2ZR-FE engine, first take out the shift lever knob, upper console panel, rear console box cover, carpet, and rear console box. Disconnect the sensor connector, remove the grommet, and use Special Service Tool 09224-00010 to extract the sensor.

How to install the heated oxygen sensor on the front exhaust pipe on Scion xD?

Install the front exhaust pipe heated oxygen sensor using SST 09224-00010. Torque 40 Nm with SST or 44 Nm without. Use 300 mm torque wrench with 30 mm SST, keep parallel. Route connector through floor, fit grommet and clamp, connect, check exhaust leaks, reinstall console components, including MT shift knob.

OEM Scion xD Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oxygen Sensors found

View related parts
Scion xD Oxygen Sensor, Front
Part Number: 89467-02070
$208.52 MSRP: $297.73
You Save: $89.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front; Air / Fuel Ratio Sensor; Air-Fuel Ratio Sensor; Air/Fuel Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Sensor, Air Fuel Ratio
- Manufacturer Note: (L)
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2014 Scion xD | Base | 4 Cyl 1.8 L GAS
View related parts
Scion xD Oxygen Sensor, Front
Part Number: 89467-02040
$192.21 MSRP: $274.44
You Save: $82.23 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front; Front Oxygen Sensor; Sensor, Air Fuel Ratio
- Position: Front
- Replaces: 89467-12030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2009 Scion xD | Base | 4 Cyl 1.8 L GAS
View related parts
Scion xD Oxygen Sensor, Rear
Part Number: 89465-52500
$129.94 MSRP: $183.95
You Save: $54.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2014 Scion xD | Base | 4 Cyl 1.8 L GAS

Scion xD Oxygen Sensor

If you're thinking about purchasing OEM parts for your Scion xD, our website is your one-stop destination. We stock an extensive selection of genuine Scion xD Oxygen Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Scion xD Oxygen Sensor Parts and Q&A

Oxygen Sensor, Front
89467-02040
Q: How to remove the heated oxygen sensor on Scion xD?
A: To remove the heated oxygen sensor from the 2ZR-FE engine, first take out the shift lever knob, upper console panel, rear console box cover, carpet, and rear console box. Disconnect the sensor connector, remove the grommet, and use Special Service Tool 09224-00010 to extract the sensor.
Oxygen Sensor, Front
89467-02070
Q: How to install the heated oxygen sensor on the front exhaust pipe on Scion xD?
A: Install the front Exhaust Pipe heated oxygen sensor using SST 09224-00010. Torque 40 Nm with SST or 44 Nm without. Use 300 mm torque wrench with 30 mm SST, keep parallel. Route connector through floor, fit grommet and clamp, connect, check exhaust leaks, reinstall console components, including MT shift knob.