Other Name: Pipe Assembly, Exhaust; Exhaust Pipe; Pipe Assembly, Exhaust, Front
Position: Front
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2012 Scion xD | Base | 4 Cyl 1.8 L GAS
Scion xD Exhaust Pipe
If you're thinking about purchasing OEM parts for your Scion xD, our website is your one-stop destination. We stock an extensive selection of genuine Scion xD Exhaust Pipe at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Scion xD Exhaust Pipe Parts Questions & Experts Answers
A: The first step to remove an exhaust pipe for a 2ZR-FE engine is to begin by removing the manual transaxle shift lever knob sub-assembly. Start by removing the upper console panel and then proceed to take out the rear console box cover along with console box carpet and rear console box sub-assembly. Take out the front console box as the next step of the procedure. Next in the procedure you should detach the heated Oxygen Sensor. Start by removing the exhaust tail pipe assembly by extracting two bolts and two compression springs which leads to the removal of the two exhaust pipe supports. Use a plastic hammer to drive out the exhaust tail pipe baffle sub-assembly. To remove the front floor center brace start by taking out the 2 bolts weaved into its structure. The front exhaust pipe assembly needs to be disassembled through the removal of 2 bolts along with 2 compression springs before removing the 3 exhaust pipe supports in succession.