OEM Scion xD PCV Valve

Scion xD PCV Valve Parts Questions & Experts Answers

• PCV Valve
  12204-37010
  Q: How to install the PCV Valve on Scion xD?

  A: Start the Positive Crankcase Ventilation Valve installation by applying Toyota Genuine Adhesive 1324 or equivalent to 2 or 3 threads of the valve. Begin by using Toyota Genuine Adhesive 1324 or Three Bond 1324 or equivalent to apply adhesive on 2 or 3 threads of the ventilation valve. Finally, tighten the valve to 20 Nm (204 kgf-cm, 15 ft-lbf) while connecting the ventilation hose. Before proceeding with automatic transaxle sub-assembly installation the technician must install both the Intake Manifold and transmission oil level gauge sub-assembly and the engine oil level dipstick. The order is to install the automatic transaxle's oil cooler tube followed by the starter assembly and injector vibration insulator and No. 1 delivery pipe spacer then continue with the fuel delivery pipe sub-assembly and fuel tube sub-assembly followed by the fuel pipe clamp and vacuum hose then connect the No. 1 fuel vapor feed hose along with harness bracket engine wire harness and air cleaner cap sub-assembly with hose. The negative battery terminal should receive the cable with 5.4 Nm (55 kgf-cm, 48 in-lbf) torque before adding engine coolant to check for coolant and fuel leakages. To complete the installation process torque down the No. 2 cylinder head cover followed by the engine under cover RH to 5.0 Nm (51 kgf-cm, 44 in-lbf) and engine under cover LH with the same torque specification.