My Garage
Cart

OEM Scion xD Starter

Starter Ignition
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Starter found

  • Scion xD Starter Diagram - 28100-37041
    View related parts

    Scion xD Starter Part Number: 28100-37041

    $244.41 MSRP: $348.96
    You Save: $104.55 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Starter Assembly; Starter Motor
    • Manufacturer Note: 12V 1.6KW
    • Replaces: 28100-37040
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following Vehicles:
    • 2008-2014 Scion xD | Base | 4 Cyl 1.8 L GAS

Scion xD Starter

Choose genuine Starter that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Starter for your Scion xD? Our website is your one-stop destination. We stock an extensive selection of genuine Scion xD parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Scion xD Starter is an electric motor assembly that transforms the power of the battery into the mechanical rotation required to crank the engine. The Starter solenoid in the Scion xD design is an external one attached to the outside of the motor case to connect directly to the battery. High current is applied to the Starter by heavy gauge wire, and this solenoid not only drives the motor but also forces the drive gear into the flywheel or flexplate ring gear. Within the housing, a rotating armature rotates in field coils or permanent magnets. With current flowing, the armature is caused to rotate by the action of the electromagnetic force and, via the Starter drive, causes the crankshaft to rotate. When the engine is fired, an overrunning clutch will disengage the drive to avoid damage. In other units, there is a gear reduction system where the armature is connected to the drive by a reduction gear to enhance torque. The control circuit begins at the ignition switch, passes through a relay, and includes neutral or clutch safety switches. This Starter system is essential to the operation of the Scion xD, and therefore it is important to every Scion xD ignition event.

Scion xD Starter Parts and Q&A

  • Q: How to install the Starter and related components on Scion xD?
    A:
    The starter assembly needs to be fastened with 2 bolts that should be tightened up to 37 Nm (377 kgf-cm, 27 ft-lbf). Connect the connector by attaching terminal 30 with the nut while maintaining a 9.8 Nm torque (100 kgf-cm and 87 in-lbf). Close the terminal cap afterward. The protruding part of the side cover must be guided to the end of the cylinder block until the claw locks into place before replacing with a new claw when fitting is loose or deformed. The next step involves installing the engine under cover RH followed by engine under cover LH. Finish the battery cable installation by fastening it to the negative terminal while applying 5.4 Nm torque force (55 kgf-cm, 48 in-lbf).

Related Scion xD Parts