How to service and repair the Canister Purge Valve on Scion xD?

The first step to service and repair the Canister Purge Valve of the 2ZR-FE emission control system requires removal of the No. 2 cylinder head cover. Begin by disconnecting the duty vacuum switching valve connector as well as the wire harness clamp and unfasten the two hoses before removing the duty vacuum switching valve but keep it away from falling while disassembling it. The service and repair of the Canister Purge Valve requires the removal of its retaining screw.

OEM Scion xD Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
Scion xD Purge Solenoid, Driver Side
Part Number: 90910-TC001
$68.36 MSRP: $95.97
You Save: $27.61 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Duty Vacuum Switching; EGR Vacuum Delay Valve; Vapor Canister Purge Solenoid; Air Injection Check Valve; Vacuum Switch; Vacuum Valve; Air Switch Valve; Valve; Vacuum Delay Valve
- Manufacturer Note: MARK 90910-TC001
- Position: Driver Side
- Replaces: 90910-12276
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2014 Scion xD | Base | 4 Cyl 1.8 L GAS

Scion xD Canister Purge Valve

If you're thinking about purchasing OEM parts for your Scion xD, our website is your one-stop destination. We stock an extensive selection of genuine Scion xD Canister Purge Valve at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Scion xD Canister Purge Valve Parts Questions & Experts Answers

Purge Solenoid, Driver Side
90910-TC001
Q: How to service and repair the Canister Purge Valve on Scion xD?
A: The first step to service and repair the Canister Purge Valve of the 2ZR-FE emission control system requires removal of the No. 2 cylinder head cover. Begin by disconnecting the duty vacuum switching valve connector as well as the wire harness clamp and unfasten the two hoses before removing the duty vacuum switching valve but keep it away from falling while disassembling it. The service and repair of the Canister Purge Valve requires the removal of its retaining screw.