×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Scion xD Clock Spring
Spiral Cable Clock Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Clock Spring found
2008 Scion xD Angle Sensor
Part Number: 84306-0E010$241.49 MSRP: $344.80You Save: $103.31 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cable Sub-Assembly, Spiral; Steering Wheel Position Sensor; Air Bag Clockspring; Clockspring; Cable Sub-Assembly, Spiral W/Sensor
- Replaces: 84306-48030
- Item Weight: 3.10 Pounds
- Item Dimensions: 14.2 x 10.8 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84306-0E010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Scion xD Clock Spring
Looking for affordable OEM 2008 Scion xD Clock Spring? Explore our comprehensive catalogue of genuine 2008 Scion xD Clock Spring. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Scion xD Clock Spring Parts Q&A
- Q: How to install the Clock Spring Assembly / Spiral Cable on 2008 Scion xD?A: The installation of the Clock Spring Assembly / Clock Spring begins with setting the ignition switch to OFF along with disconnecting the negative battery terminal but waits for at least 90 seconds before starting work. The installation process starts by checking that the front tires point forward while the turn signal switch exists in a natural state to prevent turning signal pin breakage. The installation requires the 3 claws to attach the clock spring but workers must extract the lock pin first when replacing with a new cable before fitting the steering wheel. The process requires connecting the Air Bag connector while also attaching the horn connector alongside the steering sensor assembly. After that install both the steering column upper and lower cover components. Access the center marks of the clock spring by turning it counterclockwise for locking then perform a clockwise motion 2.5 times from this locked state to correctly position the marks. You must install both the steering wheel assembly and steering pad with front wheels set to a straight forward position. Examine the SRS warning light following the process of cable connection to the negative battery terminal using a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf).