How to install the crankshaft position sensor on Toyota Sienna?

Light engine oil application is necessary to the O-ring of the sensor before installing the crankshaft position sensor. Security of the crankshaft position sensor requires installation with the specified bolt which must achieve 9.0 Nm (92 kgf-cm, 80 in-lbf) of torque. Complete the installation of the sensor and then connect its connector. The process continues by installing magnet clutch and compressor.

How to service the Crankshaft Position Sensor on Toyota Sienna?

The first step to service the Crankshaft Position Sensor from the 2GR-FE engine control system is compresser and magnetic clutch removal. The first service step requires disconnecting the crankshaft position sensor connector followed by removing the bolt that holds the sensor in place and removing the sensor completely.

OEM Toyota Sienna Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Crankshaft Position Sensors found

View related parts
Toyota Sienna Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2020 Toyota Sienna | Base, CE, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Limited, XLE Premium | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Sensor, Crank Position
Part Number: 90919-05071
$104.27 MSRP: $146.36
You Save: $42.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017 Toyota Sienna | L, LE, Limited, SE, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Sensor, Camshaft Position
Part Number: 90080-19014
$69.78 MSRP: $83.30
You Save: $13.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2008 Toyota Sienna | CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Crankshaft Position Sensor
Part Number: 90919-A5004
$99.41 MSRP: $139.54
You Save: $40.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Sensor, Crankshaft Pulse; Crankshaft Sensor; Camshaft Position Sensor
- Replaces: 90919-05070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2012 Toyota Sienna | Base, LE | 4 Cyl 2.7 L GAS
View related parts
Toyota Sienna Sensor, Crank Position
Part Number: 90919-A5003
$72.15 MSRP: $101.28
You Save: $29.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05057
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2016 Toyota Sienna | Base, CE, L, LE, Limited, SE, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Camshaft Position Sensor, Passenger Side
Part Number: 90919-05061
$124.89 MSRP: $176.80
You Save: $51.91 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Right; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Crankshaft Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: NO.1
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2020 Toyota Sienna | Base, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Premium | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Crankshaft Position Sensor
Part Number: 90080-19009
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2010 Toyota Sienna | CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Sensor, Camshaft Position
Part Number: 90919-A5007
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Sensor, Cam Position; Engine Camshaft Position Sensor
- Replaces: 90919-05096
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Sienna | 25th Anniversary Edition, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sienna Sensor, Crank Position
Part Number: 90919-A5006
$102.02 MSRP: $143.20
You Save: $41.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Replaces: 90919-05095
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Sienna | 25th Anniversary Edition, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sienna Crankshaft Position Sensor
Part Number: 90919-05090
$107.11 MSRP: $150.35
You Save: $43.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2020 Toyota Sienna | L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Premium | 6 Cyl 3.5 L GAS

Toyota Sienna Crankshaft Position Sensor

Choose genuine Crankshaft Position Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Crankshaft Position Sensor for your Toyota Sienna? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sienna parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Sienna Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
90080-19009
Q: How to install the crankshaft position sensor on Toyota Sienna?
A:
Light engine oil application is necessary to the O-ring of the sensor before installing the crankshaft position sensor. Security of the crankshaft position sensor requires installation with the specified bolt which must achieve 9.0 Nm (92 kgf-cm, 80 in-lbf) of torque. Complete the installation of the sensor and then connect its connector. The process continues by installing magnet clutch and compressor.
Sensor, Camshaft Position
90080-19014
Q: How to service the Crankshaft Position Sensor on Toyota Sienna?
A:
The first step to service the Crankshaft Position Sensor from the 2GR-FE engine control system is compresser and magnetic clutch removal. The first service step requires disconnecting the crankshaft position sensor connector followed by removing the bolt that holds the sensor in place and removing the sensor completely.