How to service the Camshaft Position Sensor on Toyota Sienna?

Service of the Camshaft Position Sensor requires disconnecting its connector before removing its two securing bolts and extracting the sensor with an 8 Nm torque setting (80 kg.cm, 69 in.lb) during reinstallation that proceeds from removal reversal order.

How to replace the Camshaft Position Sensor on Toyota Sienna?

The first step to replace the Camshaft Position Sensor requires using a 5 mm hexagon wrench to remove the 3 cap nuts of the V-bank cover followed by counterclockwise rotation of fasteners before taking out the cover. Start by removing the air cleaner hose with resonator followed by disconnecting the 2 camshaft position sensors and their connectors and uninstalling their bolts. Remove the O-rings from the sensors during removal. To perform installation replace the new O-rings on the camshaft position sensors and fasten them with bolts using a torque setting of 8.0 N.m (80 kgf.cm, 69 in.lbf). Follow the installation steps by connecting the air cleaner hose with resonator to the V-bank cover through the application of 5 mm hexagon wrench and 3 cap nuts while pressing down the fastener.

OEM Toyota Sienna Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Camshaft Position Sensors found

View related parts
Toyota Sienna Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2020 Toyota Sienna | Base, CE, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Limited, XLE Premium | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Sensor, Camshaft Position
Part Number: 90080-19014
$69.78 MSRP: $83.30
You Save: $13.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2008 Toyota Sienna | CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Camshaft Position Sensor, Passenger Side
Part Number: 90919-05061
$124.89 MSRP: $176.80
You Save: $51.91 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Right; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Crankshaft Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: NO.1
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2020 Toyota Sienna | Base, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Premium | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Sensor, Camshaft Position
Part Number: 90919-A5007
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Sensor, Cam Position; Engine Camshaft Position Sensor
- Replaces: 90919-05096
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Sienna | 25th Anniversary Edition, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sienna Sensor, Camshaft Position
Part Number: 90919-05013
$148.51 MSRP: $210.23
You Save: $61.72 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor
- Manufacturer Note: (J)
- Replaces: 90080-19006
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2000 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.0 L GAS

Toyota Sienna Camshaft Position Sensor

Choose genuine Camshaft Position Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Camshaft Position Sensor for your Toyota Sienna? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sienna parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Sienna Camshaft Position Sensor Parts and Q&A

Sensor, Camshaft Position
90919-05013
Q: How to service the Camshaft Position Sensor on Toyota Sienna?
A:
Service of the Camshaft Position Sensor requires disconnecting its connector before removing its two securing bolts and extracting the sensor with an 8 Nm torque setting (80 kg.cm, 69 in.lb) during reinstallation that proceeds from removal reversal order.
Sensor, Camshaft Position
90080-19014
Q: How to replace the Camshaft Position Sensor on Toyota Sienna?
A:
The first step to replace the Camshaft Position Sensor requires using a 5 mm hexagon wrench to remove the 3 cap nuts of the V-bank cover followed by counterclockwise rotation of fasteners before taking out the cover. Start by removing the air cleaner hose with resonator followed by disconnecting the 2 camshaft position sensors and their connectors and uninstalling their bolts. Remove the O-rings from the sensors during removal. To perform installation replace the new O-rings on the camshaft position sensors and fasten them with bolts using a torque setting of 8.0 N.m (80 kgf.cm, 69 in.lbf). Follow the installation steps by connecting the air cleaner hose with resonator to the V-bank cover through the application of 5 mm hexagon wrench and 3 cap nuts while pressing down the fastener.