OEM parts deliver unmatched quality you can rely on. They pass extensive quality control inspections. Toyota produces them to the official factory specifications. This process helps prevent defects and imperfections. So you can get exceptional lifespan and a flawless fit. Need new OEM Toyota Radiator Support? You'll love our wide selection of genuine options. Shop in minutes and skip the hunt. Our prices are unbeatable, you'll save time and money. It's easy to shop and find the right piece. Our committed customer service team gives professional help from start to finish. Every part includes a manufacturer's warranty. We ship quickly, your parts will arrive fast at your door.
Toyota Radiator Support ensures that the radiator and condenser are in place and take the small hits in the front, and allows the cooling air to flow unrestricted, to ensure that a Toyota engine remains healthy. Toyota has been known to make smart production that reduces waste and finds solutions quickly since 1937 giving drivers cars that feel reliable one mile after mile. The flexible TNGA platform helps to tighten the handling, reduce the center of gravity, and increase the safety, and the better Hybrid Synergy Drive makes the Prius family and the 2024 RAV4 Plug-in Hybrid achieve impressive fuel efficiency. These innovations demonstrate that Toyota cherishes strength, economy, and sustainability, and millions of customers believe in the badge due to the latter. Even though narrow and inconspicuous, a Toyota Radiator Support connects the frame in front, positions the hood latch and headlights, and protects the crucial cooling components against shocks or slight impacts. Installation requires parking on even-ground, removing the battery, and removing the fascia, the grille and the upper mounts. Drain the radiator, unplug hoses, wiring, and support the radiator in a way so that it can no longer fall. Lift off and unbolt the damaged Radiator Support, replace the brackets and bushings, position the new frame and hand thread each Radiator Support bolt and then verify the hood and lamp fit. Crisscross, reconnect hoses, wiring and body parts, refill and bleed the coolant and install the battery before examining gaps, latch feel and watching out leakage during short test drive.