Other Name: Computer&Switch As; Power Seat Switch, Front Left; Adjuster Switch; Computer & Switch Assembly, Position Control; Switch, Front Power Seat, Driver Side; Power Seat Switch
Highlander | 2014-2019 | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Computer&Switch As; Power Seat Switch, Front Left; Adjuster Switch; Front Power Seat Switch, Driver Side; Computer & Switch Assembly, Position Control
Q: How to install the power seat switch and related components on Toyota Corolla?
A: The power seat switch installation starts with connector attachment followed by using the 3 screws for switch fastening. After installing the front seat cushion shield assembly one should add the slide and vertical power seat switch knob followed by the reclining power seat switch knob. Finish by installing the front seat assembly and then place the inner seat track cover and outer seat track cover. Execute front seat headrest assembly installation before verifying the front seat assembly. Check the SRS warning light for proper operation among final procedures.
Q: How to properly install and test the Seat Switch for front power seat lumbar adjustment on Toyota Camry?
A: The installation of the front power seat lumbar switch requires use of 2 screws for attachment. The next installation step involves the front seat cushion shield assembly then follows installation of the slide and vertical power seat switch knob and the reclining power seat switch knob. Secondly install the front seat assembly before moving to the inner seat track bracket cover and the seat track cover. The front seat headrest assembly should be installed afterwards. It is essential to initiate the system after restoring cable power to the negative battery terminal because several systems need this action. Check the SRS warning light together with the front seat assembly operating condition. Special Service Tool: 00002-00001.
Q: How to remove the Power Seat Switch without the Seat Position Memory System from the left-hand side on Toyota Tundra?
A: The first step to remove the Power Seat Switch without the Seat Position Memory System on the left-hand side requires disassembly of the front seat assembly from its LH position. Quitting begins with removal of the slide and vertical power seat switch knob LH while following the process with removal of the reclining power seat switch knob LH. The next step removes both the front seat cushion shield LH and the leg support adjustment switch if this equipment is present. The last step involves disconnecting the front power seat switch being on the left side. Apply the identical method to the right-hand side.