Other Name: Bearing, Radial Ball; Wheel Bearing, Front, Front Left, Front Right, Rear; Wheel Bearing Kit; Wheel Bearings; Front Wheel Bearing for Passenger & Driver Side Axle Hub.
Replaces: 90363-40069, 90363-40066
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2003-2013 Toyota Matrix | Base, XR, XRS | 4 Cyl 1.8 L GAS
Other Name: Bearing, Radial Ball; Wheel Bearing, Front, Front Left, Front Right; Wheel Bearing Kit; Front Wheel Bearing for Passenger and Driver Side Axle Hub.
Replaces: 90363-A0001, 90369-45005, 90369-45003
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2009-2013 Toyota Matrix | S, XRS | 4 Cyl 2.4 L GAS
Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Wheel Hub Repair Kit; Hub Assembly; Front Hub; Hub; Hub Sub-Assembly, Front Axle, Passenger Side; Hub Sub-Assembly, Front Axle, Driver Side
Position: Front
Replaces: 43502-32080, 43502-02100
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2003-2013 Toyota Matrix | Base, XR, XRS | 4 Cyl 1.8 L GAS
Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Wheel Hub Repair Kit; Front Hub; Hub; Hub Sub-Assembly, Front Axle, Passenger Side; Hub Sub-Assembly, Front Axle, Driver Side; Wheel Hub
Position: Front
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2009-2013 Toyota Matrix | S, XRS | 4 Cyl 2.4 L GAS
Toyota Matrix Wheel Bearing
If you're thinking about purchasing OEM parts for your Toyota Matrix, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Matrix Wheel Bearing at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Toyota Matrix Wheel Bearing Parts Questions & Experts Answers
Q: How to replace the rear Wheel hub and Wheel Bearing on the left-hand side on Toyota Matrix?
A: The first step to replace the left-hand side rear wheel hub and bearing assembly requires removal of the rear wheel. To initiate the procedure start by disassembling the rear disc brake caliper assembly LH through the removal of its 2 bolts. Start by removing the rear disc followed by taking out the rear brake drum sub-assembly when needed. Start the replacement of the left-hand side rear wheel hub and bearing assembly by first cutting the skid control sensor wire then removing the 4 bolts. Install the new hub and bearing assembly LH by applying 4 bolts which should be secured with a torque of 61 Nm (622 kgf-cm, 45 ft. lbs.). Reconnect the skid control sensor wire following the correct procedure since wire twisting should be avoided. A dial indicator inspection of bearing backlash must show results below 0.05 mm (0.0020 inch); otherwise you must replace the rear wheel hub and bearing assembly. Additionally check the wheel hub deviation at the surface outside the hub bolt for a 0.07 mm (0.0028 inch) maximum limit then follow necessary assembly replacements. You should now mount the rear disc and the rear disc brake caliper assembly LH with 2 bolts yet ensure proper torque application at 47 Nm (479 kgf-cm, 35 ft. lbs.). Reinstall the rear wheel after installing the brakedrum sub-assembly when needed while tightening the bolts to 103 Nm (1,050 kgf-cm, 76 ft. lbs.). The ABS speed sensor signal needs to be checked as the final step in the process.