Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 90080-36133
Bearing (For Front Drive Shaft)

1995-2023 Toyota 9008036133

Customer Questions & Expert Answers (31)
Toyota 90080-36133 Bearing (For Front Drive Shaft)
Toyota 90080-36133 Bearing (For Front Drive Shaft)
Toyota 90080-36133 Bearing (For Front Drive Shaft)
Toyota 90080-36133 Bearing (For Front Drive Shaft)
  • Part Description
    Bearing, Radial Ball; Wheel Bearing; Axle Bearing
  • Part Name Code
    43410C
  • Comment
    (FOR FRONT DRIVE SHAFT)
  • Replaces
    90363-41002, 90369-41001
  • Manufacturer
    Toyota
Make sure this part fits
$31.18 MSRP: $43.39
You Save: $12.21 (29%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 90080-36133 Bearing (For Front Drive Shaft) is Ref No. 7 in the diagram below

    2003 Toyota Camry Bearing (For Front Drive Shaft) Diagram for 90080-36133
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 90080-36133

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code43410C
    Manufacturer Part Number90080-36133
    Part DescriptionBearing, Radial Ball; Wheel Bearing; Axle Bearing
    Item Dimensions3.2 x 1.0 x 3.4 inches
    Item Weight1.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces90363-41002, 90369-41001
    ManufacturerToyota
    SKU90080-36133
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2013-2018, 1995-2004 Toyota AvalonHybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
    2012-2017, 1995-2006 Toyota CamryBase, CE, Hybrid LE, Hybrid SE, Hybrid XLE, LE, SE, XLE4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
    2009-2010 Toyota CorollaXRS4 Cyl 2.4 L GAS
    2010-2019, 2001-2007 Toyota HighlanderBase, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
    2009-2013 Toyota MatrixS, XRS4 Cyl 2.4 L GAS
    2001-2005 Toyota RAV4Base, L, Sport4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    2021-2023, 2011-2016, 1998-2003 Toyota Sienna25th Anniversary Edition, Base, CE, L, LE, Limited, Platinum, SE, XLE, XSE4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
    1999-2008 Toyota SolaraSE, SE Sport, SLE, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
    2009-2015 Toyota VenzaBase, LE, Limited, XLE4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 90080-36133 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 90080-36133 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the next step after disconnecting the strut rod for the 2000 Toyota Camry? Posted by Customer
    A:
    Remove the 2 nuts and bolts on the lower side of the shock absorber, followed by the nut, bolt, and No.2 lower suspension arm, and finally remove the rear axle carrier.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the process for reassembling the bearing into the steering knuckle for the 2001 Toyota Camry? Posted by Customer
    A:
    Install a new bearing into the steering knuckle using Special Service Tool: 09608-32010 and a press, followed by installing a new snap ring with snap ring pliers.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the procedure for disconnecting the strut rod for the 2001 Toyota Avalon? Posted by Customer
    A:
    Disconnect the strut rod from the rear axle carrier by removing the bolt and nut without turning the nut, applying a torque of 113 Nm (1,150 kgf-cm, 83 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done for 2001 Toyota Camry with disc brakes? Posted by Customer
    A:
    Remove the brake caliper and disc, applying a torque of 47 Nm (475 kgf-cm, 34 ft. lbs.), and support the brake caliper securely.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you reconnect the rear flexible hose for the 2003 Toyota Camry? Posted by Customer
    A:
    Use a bolt at a torque of 18.8 Nm (192 kgf-cm, 14 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done after removing the rear wheel for the 2000 Toyota Avalon? Posted by Customer
    A:
    Remove the brake caliper and disc with a torque of 47 Nm (475 kgf.cm, 34 ft. lbs.), and support the brake caliper securely.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done if the bearing backlash exceeds the maximum allowable limit for the 2005 Toyota Camry? Posted by Customer
    A:
    The axle hub assembly must be replaced.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the maximum deviation allowed at the surface of the axle hub for the 2002 Toyota Avalon? Posted by Customer
    A:
    The deviation at the surface of the axle hub outside the hub bolt should not exceed 0.07 mm (0.0028 inch); replace the axle hub if necessary.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you secure the dust cover for the 2000 Toyota Camry? Posted by Customer
    A:
    Place the dust cover and secure it with the 4 bolts, torquing them to 8.3 Nm (85 kgf.cm, 74 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the final step in the process for the 2003 Toyota Highlander? Posted by Customer
    A:
    Reinstall the rear wheel, ensuring a torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.), inspect and adjust the rear wheel alignment, and check the ABS speed sensor signal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you reinstall the rear axle hub and bearing assembly for the 2001 Toyota Highlander? Posted by Customer
    A:
    Secure it with the four bolts, torqued to 80 Nm (816 kgf-cm, 59 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you check the axle hub deviation for the 2004 Toyota Highlander? Posted by Customer
    A:
    Use a dial indicator at the surface of the axle hub outside the hub bolt; the maximum deviation is 0.08 mm (0.0031 inch).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the final step in the process for the 2006 Toyota Highlander? Posted by Customer
    A:
    Install the rear wheel, torqued to 103 Nm (1,050 kgf-cm, 76 ft. lbs.), inspect rear wheel alignment, and check the ABS speed sensor signal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done after installing the rear axle hub and bearing assembly for the 2007 Toyota Highlander? Posted by Customer
    A:
    Reconnect the skid control sensor wire, inspect bearing backlash and axle hub deviation, then install the rear disc.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What tools are needed to remove the ABS speed sensor for the 2005 Toyota RAV4? Posted by Customer
    A:
    Use Special Service Tool: 09520-00031 (09520-00040, 09521-00020), 09950-00020, and two bolts (Diameter: 12 mm, Pitch: 1.5 mm).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you reinstall the front axle assembly LH for the 2001 Toyota Highlander? Posted by Customer
    A:
    Secure it with 2 bolts and nuts to the shock absorber, torquing to 210 Nm (2,143 kgf-cm, 155 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to service and repair the wheel bearing for the 2004 Toyota RAV4? Posted by Customer
    A:
    Begin by removing the lower ball joint by taking out the cotter pin and nut, then using Special Service Tool: 09628-62011 to detach the lower ball joint.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to replace the rear wheel bearing for the 2005 Toyota Highlander? Posted by Customer
    A:
    Begin by removing the rear wheel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you replace the ABS speed sensor for the 2001 Toyota RAV4? Posted by Customer
    A:
    Use a pin punch and hammer to pull out the two pins and remove the two attachments using Special Service Tool: 09520-00031 (09520-00040, 09521-00020).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done after removing the rear wheel for the 2000 Toyota Sienna? Posted by Customer
    A:
    Remove the brake drum and check the bearing backlash and axle hub deviation.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What tool is used to remove the axle hub for the 2000 Toyota Solara? Posted by Customer
    A:
    Utilize Special Service Tool: 09520-00031 to remove the axle hub.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you remove the rear axle hub for the 2002 Toyota Sienna? Posted by Customer
    A:
    Take off the 4 nuts, applying a torque of 80 Nm (820 kgf-cm, 59 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done with the ABS speed sensor for the 2001 Toyota Sienna? Posted by Customer
    A:
    Disconnect the ABS speed sensor connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you disconnect the tie rod end from the steering knuckle for the 2003 Toyota Sienna? Posted by Customer
    A:
    Remove the cotter pin and nut with a torque of 49 Nm (500 kgf-cm, 36 ft. lbs.), then use Special Service Tool: 09610-20012 to disconnect it.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to replace the REAR AXLE HUB & BEARING ASSY LH for the 2004 Toyota Solara? Posted by Customer
    A:
    First, remove the rear wheel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the procedure for installing the hub and bearing assembly LH for the 2005 Toyota Solara? Posted by Customer
    A:
    Place the hub and bearing assembly LH back in position and secure it with the 4 bolts, torquing them to 80 Nm (816 kgf-cm, 59 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to service and repair the rear axle hub and bearing for the 2006 Toyota Solara? Posted by Customer
    A:
    Begin by removing the rear wheel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step in servicing and repairing the wheel bearing for the 2000 Toyota Sienna? Posted by Customer
    A:
    Begin by removing the lower ball joint: use a screwdriver to take off the dust deflector, then remove the cotter pin and nut, followed by using Special Service Tool: 09628-62011 to detach the lower ball joint.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done after installing the rear wheel for the 2008 Toyota Solara? Posted by Customer
    A:
    Inspect and adjust the rear wheel alignment.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the torque specification for the 2 bolts and nuts on the lower side of the shock absorber for the 2000 Toyota Solara? Posted by Customer
    A:
    Torque to 220 Nm (2,250 kgf-cm, 162 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Wheel Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 90080-36133, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 90080-36133 Bearing (For Front Drive Shaft). It is sometimes referred to as Toyota Wheel Bearing. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 9008036133 Bearing (For Front Drive Shaft). At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery