How to remove the Clock Spring Assembly / Spiral Cable on Toyota Camry?

Reading all the safety precautions must be your first step before starting the Clock Spring Assembly / Clock Spring removal process. Disconnect the battery cable from the negative terminal to wait for 90 seconds before conducting this procedure because this will help avoid Air Bag deployment. Begin by positioning the front wheels directly forward and then remove first the lower steering wheel No.3 cover followed by the No.2 lower steering wheel cover. Once the steering wheel assembly and steering pad are taken away from the assembly, remove the steering column cover as your next step after the other components. Unplug the clock spring steering angle sensor connectors while keeping away from damaging the Air Bag wire harness. Finish the removal of the clock spring with steering angle sensor by first severing its attachment with the 3 claws before separating the clock spring from the steering angle sensor using the remaining 6 claws and 2 pins.

How to install the Clock Spring with and without VSC while ensuring safety and proper alignment on Toyota Camry?

Installation of the clock spring with VSC requires attaching it to the steering angle sensor using 6 claws when the front wheels are straight and the turn signal switch positioned at neutral to prevent pin snappage. Secure the clock spring with steering angle sensor by engaging the 3 claws while connecting the connectors but avoid touching the Air Bag wire harness. One must remove the lock pin before assembling the steering wheel because of its clock spring replacement. The installation without VSC requires wheel alignment and turn signal switch neutral position according to initial requirements before engaging the three claws and connecting the connectors. A necessary safety check requires you to turn off the ignition and remove the negative battery cable for 90 seconds to stop Air Bag activation before beginning work. After creating firm tension by rotating the clock spring counterclockwise you must turn it clockwise only a few 2.5 turns to match the marks while keeping the Air Bag wire harness out of the way. The steering wheel assembly installation should be followed by checking the steering wheel center point and installing both lower steering wheel covers and the steering pad. Conclusion involves attaching the negative cable and inspecting the steering pad as well as checking the SRS warning light.

OEM Toyota Camry Clock Spring

Spiral Cable Clock Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Clock Springs found

View related parts
Toyota Camry Angle Sensor
Part Number: 84306-0E010
$241.49 MSRP: $344.80
You Save: $103.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Steering Wheel Position Sensor; Air Bag Clockspring; Clockspring; Cable Sub-Assembly, Spiral W/Sensor
- Replaces: 84306-48030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84306-35011
$326.54 MSRP: $466.22
You Save: $139.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Replaces: 84306-08010, 84306-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-1999 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84306-12070
$274.00 MSRP: $391.21
You Save: $117.21 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84306-0C010
$330.96 MSRP: $472.54
You Save: $141.58 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Camry | CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84306-06150
$264.56 MSRP: $377.73
You Save: $113.17 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84306-06030
$330.96 MSRP: $472.54
You Save: $141.58 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Replaces: 84306-33080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84306-06010
$330.96 MSRP: $472.54
You Save: $141.58 (30%)
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-1999 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84307-06090
$537.64 MSRP: $787.91
You Save: $250.27 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring; Cable Sub-Assembly, Spiral W/Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2014 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, LE, SE, SE Sport, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84307-02220
$462.84 MSRP: $678.30
You Save: $215.46 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring; Cable Sub-Assembly, Spiral W/Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2017 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, LE, SE, Special Edition, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Cable Sub-Assembly, Spiral
Part Number: 84306-24010
$379.99 MSRP: $556.87
You Save: $176.88 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE SUB-ASSY, SPIR; Air Bag Clockspring
- Replaces: 84306-28020, 84306-33020, 84306-20040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1996 Toyota Camry | DLX, DX, LE, SE, XLE | 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84308-11010
$294.97 MSRP: $421.15
You Save: $126.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Set, Spiral W/; Air Bag Clockspring; Cable Sub-Assembly, Spiral
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2019 Toyota Camry | L, LE, SE, XLE, XSE | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84308-0R030
$300.33 MSRP: $428.79
You Save: $128.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Set, Spiral W/; Air Bag Clockspring; Cable Sub-Assembly, Spiral
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2024 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84308-06040
$268.40 MSRP: $383.22
You Save: $114.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Set, Spiral W/; Air Bag Clockspring; Cable Sub-Assembly, Spiral
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2024 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84307-33010
$636.16 MSRP: $932.29
You Save: $296.13 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Manufacturer Note: W(VSC)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2003 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84307-06130
$540.48 MSRP: $792.08
You Save: $251.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring; Cable Sub-Assembly, Spiral W/Sensor
- Manufacturer Note: AUDIO-CD TUNER(EXTRA) 6SPEAKER
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2014 Toyota Camry | L | 4 Cyl 2.5 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84307-33020
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Manufacturer Note: W(VSC)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Clockspring
Part Number: 84306-33010
Product Specifications
- Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1996 Toyota Camry | LE, XLE | 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS

Toyota Camry Clock Spring

Choose genuine Clock Spring that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Clock Spring for your Toyota Camry? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Camry Clock Spring Parts and Q&A

Clockspring
84306-06150
Q: How to remove the Clock Spring Assembly / Spiral Cable on Toyota Camry?
A:
Reading all the safety precautions must be your first step before starting the Clock Spring Assembly / Clock Spring removal process. Disconnect the battery cable from the negative terminal to wait for 90 seconds before conducting this procedure because this will help avoid Air Bag deployment. Begin by positioning the front wheels directly forward and then remove first the lower Steering Wheel No.3 cover followed by the No.2 lower steering wheel cover. Once the steering wheel assembly and steering pad are taken away from the assembly, remove the steering column cover as your next step after the other components. Unplug the clock spring Steering Angle Sensor connectors while keeping away from damaging the Air Bag wire harness. Finish the removal of the clock spring with steering angle sensor by first severing its attachment with the 3 claws before separating the clock spring from the steering angle sensor using the remaining 6 claws and 2 pins.
Angle Sensor
84306-0E010
Q: How to install the Clock Spring with and without VSC while ensuring safety and proper alignment on Toyota Camry?
A:
Installation of the clock spring with VSC requires attaching it to the Steering Angle Sensor using 6 claws when the front wheels are straight and the turn signal switch positioned at neutral to prevent pin snappage. Secure the clock spring with steering angle sensor by engaging the 3 claws while connecting the connectors but avoid touching the Air Bag wire harness. One must remove the lock pin before assembling the Steering Wheel because of its clock spring replacement. The installation without VSC requires wheel alignment and turn signal switch neutral position according to initial requirements before engaging the three claws and connecting the connectors. A necessary safety check requires you to turn off the ignition and remove the negative battery cable for 90 seconds to stop Air Bag activation before beginning work. After creating firm tension by rotating the clock spring counterclockwise you must turn it clockwise only a few 2.5 turns to match the marks while keeping the Air Bag wire harness out of the way. The steering wheel assembly installation should be followed by checking the steering wheel center point and installing both lower steering wheel covers and the steering pad. Conclusion involves attaching the negative cable and inspecting the steering pad as well as checking the SRS warning light.