2003 Toyota Camry Airbag, Clock Spring, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2003 Toyota Camry

• Q: What precautions should be taken when scrapping a vehicle equipped with an SRS or disposing of a steering wheel pad and Clock Spring with an Air Bag on 2003 Toyota Camry?

  A: When scraping a vehicle with SRS, or an air bag steering wheel pad; deploy the Air Bag in an outdoor environment with the designated tool, being cautious of the noise and the local neighbors. post-deployment: let the pad cool down in 30 minutes, put on gloves and safety glasses, and wash your hands after that. Wrap pad up in a vinyl bag.
• Q: How to replace the Air Bag Sensor Rear LH on 2003 Toyota Camry?

  A: In order to change the Air Bag Sensor Rear LH, disconnect the battery negative terminal and take out rear seat cushion assembly and rear side seat back assembly LH. Unplug the sensor connector, loosen the connecting bolts and screw in a new sensor. Install Only after verifying the presence of no damage when assembling.
• Q: What precautions should be taken when deploying and disposing of a front seat Airbag assembly on 2003 Toyota Camry?

  A: To avoid problems with scrapping vehicles with an SRS or discarding the front seat air bag assembly, always deploy the air bag first with the given tool. Deploy out of doors, maintaining a distance of at least 10m. Wear protective gloves & eyewear, and then wash your hands. Deploy and dispose properly.