Other Name: Control Assembly, Air Conditioner; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
Fits the following Toyota Models:
Camry | 2018-2024 | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Control Assembly, Air Conditioner; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Control Assembly, Heater Or Boost Ventilator
Other Name: Control Assembly, Air Conditioner; Climate Control Module
Fits the following Toyota Models:
Highlander | 2014-2019 | Hybrid LE, Hybrid XLE, LE, LE Plus, Limited, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Q: How to service the rear Blower Control Switches on Toyota Highlander?
A: Service of the rear blower switch begins with removing the deck side trim cover front by using a tape-covered thin flat-head screwdriver to release its 2 claw fittings. The next step requires removal of the deck side trim cover RH through bolt removal followed by releasing the 2 clip fittings and 2 claw fittings and disconnecting the connector. Remove the rear heater blower switch through the process of unscrewing both attached screws. Begin by mounting the rear heater blower switch on its place and use two screws for fastening. Reconnect the connector then install the deck side trim cover RH with proper engagement between the 2 clip fittings and 2 claw fittings before securing the bolt. Users must install the front deck side trim cover by engaging the 2 claw fittings.