How to remove the rear Sway Bar Kit on Toyota Avalon?

Starting the work on rear sway bar kit removal requires wheel removal first followed by the removal of the center exhaust pipe assembly. First remove the nut on the left-hand side rear sway bar link assembly before disconnecting it from the rear sway bar kit. In case the ball joint rotates with the nut use a 5 mm hexagon wrench to hold the stud. Maintain the identical procedure for the right-hand link. First detach the No. 2 rear sway bar bracket when you remove its 2 bolts then proceed to take away the No. 1 rear sway bar bracket whose 2 bolts need to be removed too. To finish this step remove first the rear sway bar kit together with its sway bar bushing before taking out the rear sway bar bushings that fasten the bar in place. The first step removes all existing gaskets from the pipe followed by a replacement of any deteriorated bolts or nuts.

How to install the front Sway Bar Kit on Toyota Avalon?

The first step to install the sway bar kit front is attaching it to the vehicle framework. The procedure for installing the front sway bar bush No. 1 begins with proper placement of the bushes on the outer aspect of each bush stopper while maintaining the cutout section toward the rear side. Attain 2 front sway bar bracket No. 1 LH bolts and torque them to 27 Nm (275 kgf-cm, 20 ft-lbf) then apply the same sequence for front sway bar bracket No. 1 RH. Install the combination of engine assembly and transaxle as the next step. To install the front sway bar link assembly LH attach it with 2 nuts fastened to 74 Nm (755 kgf-cm, 55 ft-lbf) while using a hexagon (6 mm) wrench on the stud to prevent ball joint rotation when tightening the nut. Perform the installation sequence on the right-hand side front sway bar link assembly using the provided instructions. The installation of the front wheel requires turning the torque wrench to 103 Nm (1,050 kgf-cm, 76 ft-lbf). Always engage in power steering fluid bleeding before performing analysis and adjustment of front wheel alignment if required.

OEM Toyota Avalon Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Sway Bar Kits found

View related parts
Toyota Avalon Stabilizer Bar, Rear
Part Number: 48812-07010
$121.95 MSRP: $172.64
You Save: $50.69 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: TRD PACKAGE
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited, Touring, TRD, XLE, XSE, XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Front
Part Number: 48811-07030
$145.45 MSRP: $205.91
You Save: $60.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: TRD PACKAGE
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited, Touring, TRD, XLE, XSE, XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Front
Part Number: 48811-06251
$130.88 MSRP: $185.29
You Save: $54.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: TYPE A:REFER ILLUST.
- Position: Front
- Replaces: 48811-06260, 48811-06250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Rear
Part Number: 48812-AC020
$81.98 MSRP: $115.07
You Save: $33.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1996 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Bar, Stabilizer, Front
Part Number: 48811-33080
$83.77 MSRP: $117.59
You Save: $33.82 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Manufacturer Note: (J)
- Position: Front
- Replaces: 48811-07010, 48811-AA070, 48811-AC020, 48811-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Rear
Part Number: 48812-AC040
$102.85 MSRP: $144.36
You Save: $41.51 (29%)
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Rear
Part Number: 48812-AA071
$86.23 MSRP: $121.05
You Save: $34.82 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Avalon | Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Rear
Part Number: 48812-AA010
$98.82 MSRP: $138.70
You Save: $39.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-AC030, 48812-33100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005, 1996-1999 Toyota Avalon | Limited, Touring, XL, XLS | 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Rear
Part Number: 48812-06250
$86.49 MSRP: $121.41
You Save: $34.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-33290
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited, Touring, TRD, XLE, XSE, XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Rear
Part Number: 48812-06240
$94.20 MSRP: $132.22
You Save: $38.02 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: MEXICO SPEC
- Position: Rear
- Replaces: 48812-33280
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited, Touring, TRD, XLE, XSE, XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Bar, Stabilizer, Rear
Part Number: 48812-06220
$77.37 MSRP: $108.60
You Save: $31.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Stabilizer Bar, Rear
Part Number: 48812-06210
$79.15 MSRP: $111.09
You Save: $31.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Bar, Stabilizer, Rear
Part Number: 48812-06080
$80.69 MSRP: $113.26
You Save: $32.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Rear
- Replaces: 48812-33210
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2012 Toyota Avalon | Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Front
Part Number: 48811-07021
$121.25 MSRP: $171.64
You Save: $50.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2012 Toyota Avalon | Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Bar, Stabilizer, Front
Part Number: 48811-06300
$113.16 MSRP: $158.84
You Save: $45.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Front
Part Number: 48811-06290
$113.16 MSRP: $158.84
You Save: $45.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | XLE | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Front
Part Number: 48811-33050
Product Specifications
- Other Name: Bar, Stabilizer, Front; Sway Bar
- Position: Front
- Replaces: 48811-AC010, 48811-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1997 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Stabilizer Bar, Front
Part Number: 48811-07020
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005 Toyota Avalon | Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS

Toyota Avalon Sway Bar Kit

Choose genuine Sway Bar Kit that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Sway Bar Kit for your Toyota Avalon? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Avalon parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Sway Bar Kit in Toyota Avalon vehicles is intended to improve the manner in which the vehicle navigates by linking the contrasting ends of the suspension system. This kit mainly is said to minimize the lateral movement of the body of the car especially during high speed bendings and trunk, enhancing the stability of the vehicle. The anti roll bar work according to the principle of torsion where the wheels are made to adjust to similar altitude and thereby reduces side way tilt as well as increases road grip. There are several models of Sway Bar Kits that have been incorporated in the Toyota Avalon over the years such as the adjustable and the active anti-roll bar. To do so, these advanced systems can provide adjustable stiffness, improving ride and handling figures. Although, conventional solid sway bars enhance the handling characteristics, they also transfer the jitters from wheels to one another and the vehicle waddles on uneven surfaces. In summary, the Toyota Avalon Sway Bar Kit is central in controlling the vehicle handling balance, something that determines the car performance on the road.

Toyota Avalon Sway Bar Kit Parts and Q&A

Bar, Stabilizer, Rear
48812-06080
Q: How to remove the rear Sway Bar Kit on Toyota Avalon?
A:
Starting the work on rear sway bar kit removal requires wheel removal first followed by the removal of the center Exhaust Pipe assembly. First remove the nut on the left-hand side rear sway bar link assembly before disconnecting it from the rear sway bar kit. In case the Ball Joint rotates with the nut use a 5 mm hexagon wrench to hold the stud. Maintain the identical procedure for the right-hand link. First detach the No. 2 rear sway bar bracket when you remove its 2 bolts then proceed to take away the No. 1 rear sway bar bracket whose 2 bolts need to be removed too. To finish this step remove first the rear sway bar kit together with its sway bar bushing before taking out the rear sway bar bushings that fasten the bar in place. The first step removes all existing gaskets from the pipe followed by a replacement of any deteriorated bolts or nuts.
Stabilizer Bar, Front
48811-07021
Q: How to install the front Sway Bar Kit on Toyota Avalon?
A:
The first step to install the sway bar kit front is attaching it to the vehicle framework. The procedure for installing the front sway bar bush No. 1 begins with proper placement of the bushes on the outer aspect of each bush stopper while maintaining the cutout section toward the rear side. Attain 2 front sway bar bracket No. 1 LH bolts and torque them to 27 Nm (275 kgf-cm, 20 ft-lbf) then apply the same sequence for front sway bar bracket No. 1 RH. Install the combination of engine assembly and transaxle as the next step. To install the front sway bar link assembly LH attach it with 2 nuts fastened to 74 Nm (755 kgf-cm, 55 ft-lbf) while using a hexagon (6 mm) wrench on the stud to prevent ball joint rotation when tightening the nut. Perform the installation sequence on the right-hand side front sway bar link assembly using the provided instructions. The installation of the front wheel requires turning the torque wrench to 103 Nm (1,050 kgf-cm, 76 ft-lbf). Always engage in power steering fluid bleeding before performing analysis and adjustment of front wheel alignment if required.