How to install the rear Sway Bar Kit on 2008 Toyota Avalon?

Start by putting the 2 rear sway bar bushings on the exterior of the stopper ring which is located on the sway bar kit. After attaching the No. 2 rear sway bar bracket, proceed to install the No. 1 rear sway bar bracket. Secure the rear sway bar kit with two bolts at both LH and RH sides while torquing each bolt to 31 Nm (316 kgf-cm, 23 ft-lbf). Genesis owners should attach the rear sway bar link assembly LH with a nut that needs to be secured at 39 Nm (400 kgf-cm, 29 ft-lbf); when the ball joint moves with the nut, stabilize the stud using a 5 mm hexagon wrench. The same steps must be performed to install the rear sway bar link assembly on the right-hand side. Install the center exhaust pipe assembly before and then add the rear wheels while torquing them to 103 Nm (1,050 kgf-cm, 76 ft-lbf). Check for exhaust gas leaks as the last step.

OEM 2008 Toyota Avalon Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Kits found

View related parts
2008 Toyota Avalon Stabilizer Bar, Front
Part Number: 48811-07021
$121.25 MSRP: $171.64
You Save: $50.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 44.2 x 12.1 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-07021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Avalon Bar, Stabilizer, Rear
Part Number: 48812-06080
$80.69 MSRP: $113.26
You Save: $32.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Rear
- Replaces: 48812-33210
- Part Name Code: 48812
- Item Weight: 5.20 Pounds
- Item Dimensions: 41.5 x 9.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-06080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS

2008 Toyota Avalon Sway Bar Kit

Looking for affordable OEM 2008 Toyota Avalon Sway Bar Kit? Explore our comprehensive catalogue of genuine 2008 Toyota Avalon Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Avalon Sway Bar Kit Parts Q&A

Q: How to install the rear Sway Bar Kit on 2008 Toyota Avalon?
A: Start by putting the 2 rear sway bar bushings on the exterior of the stopper ring which is located on the sway bar kit. After attaching the No. 2 rear sway bar bracket, proceed to install the No. 1 rear sway bar bracket. Secure the rear sway bar kit with two bolts at both LH and RH sides while torquing each bolt to 31 Nm (316 kgf-cm, 23 ft-lbf). Genesis owners should attach the rear sway bar link assembly LH with a nut that needs to be secured at 39 Nm (400 kgf-cm, 29 ft-lbf); when the ball joint moves with the nut, stabilize the stud using a 5 mm hexagon wrench. The same steps must be performed to install the rear sway bar link assembly on the right-hand side. Install the center exhaust pipe assembly before and then add the rear wheels while torquing them to 103 Nm (1,050 kgf-cm, 76 ft-lbf). Check for exhaust gas leaks as the last step.