How to install the lower ball joint assembly front LH and complete the front suspension assembly on 2008 Toyota Avalon?

The installation of the front LH lower ball joint assembly begins with securing it to the steering knuckle through the castle nut until it reaches 123 Nm (1,250 kgf-cm, 91 ft-lbf) torque then adding a new cotter pin; aligning misaligned cotter pin holes requires additional tightening of the nut up to 60 degrees. After the front axle assembly LH go to install the front lower suspension arm before finishing with the tie rod assembly LH. Based on the installation sequence install the disc wheel then install the front disc brake caliper assembly LH. The technician installs the front wheel followed by torqueing it to 103 Nm (1,050 kgf-cm, 76 ft-lbf) after attaching the speed sensor front LH and the front axle hub LH nut. The technician should inspect front wheel alignment and verify ABS speed sensor functionality by implementing correct steps for cars with or without Vehicle Stability Control (VSC).

OEM 2008 Toyota Avalon Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

View related parts
2008 Toyota Avalon Ball Joint, Front Passenger Side
Part Number: 43330-09810
$63.03 MSRP: $88.48
You Save: $25.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Right; Lower Ball Joint; Joint Assembly, Lower Ball, Front Passenger Side; Suspension Ball Joint
- Position: Front Passenger Side
- Replaces: 43330-09330
- Part Name Code: 43330K
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.4 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43330-09810
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Base, Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Avalon Ball Joint, Front Driver Side
Part Number: 43340-09170
$62.56 MSRP: $87.81
You Save: $25.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Left; Lower Ball Joint; Joint Assembly, Lower Ball, Front Driver Side; Suspension Ball Joint
- Position: Front Driver Side
- Replaces: 43340-09040
- Part Name Code: 43340A
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.4 x 3.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43340-09170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Base, Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2008 Toyota Avalon Ball Joint

Looking for affordable OEM 2008 Toyota Avalon Ball Joint? Explore our comprehensive catalogue of genuine 2008 Toyota Avalon Ball Joint. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Avalon Ball Joint Parts Q&A

Q: How to install the lower ball joint assembly front LH and complete the front suspension assembly on 2008 Toyota Avalon?
A: The installation of the front LH lower ball joint assembly begins with securing it to the steering knuckle through the castle nut until it reaches 123 Nm (1,250 kgf-cm, 91 ft-lbf) torque then adding a new cotter pin; aligning misaligned cotter pin holes requires additional tightening of the nut up to 60 degrees. After the front axle assembly LH go to install the front lower suspension arm before finishing with the tie rod assembly LH. Based on the installation sequence install the disc wheel then install the front disc brake caliper assembly LH. The technician installs the front wheel followed by torqueing it to 103 Nm (1,050 kgf-cm, 76 ft-lbf) after attaching the speed sensor front LH and the front axle hub LH nut. The technician should inspect front wheel alignment and verify ABS speed sensor functionality by implementing correct steps for cars with or without Vehicle Stability Control (VSC).