How to remove the rear shock absorber with coil spring on 2008 Toyota Avalon?

The procedure to remove the rear shock absorber with coil spring starts with the removal of the rear seat cushion assembly then continues to the rear seat headrest plate cover LH and rear seat headrest assembly and the rear seatback assembly. First remove the rear wheel then use a jack for securing the front axle carrier. The process begins by unpacking the nut and removing the shock absorber stabilizer link from its position. Usage of a 5 mm hexagon wrench becomes necessary to stabilize the stud whenever the ball joint spins while using the nut. The shock absorber maintenance continues with the second step of hose flexible removal through its two bolts using a combination of torque wrenches to separate both the flexible hose and skid control sensor wire. The technician should loosen the two shock absorber nuts located at its lower section. However, the technician should not remove the two bolts or two nuts. Loosen the LH support suspension center nut while keeping it installed unless the shock absorber will get fully disassembled. You must first detach the 3 nuts then lower the rear axle carrier before using the last step to remove the shock absorber with coil spring by taking out the 2 bolts and 2 nuts from the lower shock absorber side.

OEM 2008 Toyota Avalon Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Shock Absorbers found

View related parts
2008 Toyota Avalon Strut, Rear Driver Side
Part Number: 48540-80013
$137.82 MSRP: $195.10
You Save: $57.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Left Suspension Strut; Strut Assembly Kit; Complete Strut; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-07150,SPORTS PACKAGE
- Position: Rear Driver Side
- Replaces: 48540-09830
- Part Name Code: 48540
- Item Weight: 6.80 Pounds
- Item Dimensions: 26.9 x 6.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-80013
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Touring, XL | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Avalon Strut, Rear Passenger Side
Part Number: 48530-80530
$137.82 MSRP: $195.10
You Save: $57.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Right Suspension Strut; Strut Assembly Kit; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-07130,SPORTS PACKAGE
- Position: Rear Passenger Side
- Replaces: 48530-09P50, 48530-09L60
- Part Name Code: 48530
- Item Weight: 7.10 Pounds
- Item Dimensions: 26.6 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80530
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Touring, XL | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Avalon Strut, Rear Driver Side
Part Number: 48540-80012
$141.69 MSRP: $200.58
You Save: $58.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Left Suspension Strut; Strut Assembly Kit; Complete Strut; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-07140
- Position: Rear Driver Side
- Replaces: 48540-09820
- Part Name Code: 48540
- Item Weight: 12.80 Pounds
- Item Dimensions: 26.4 x 6.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-80012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Base, Limited, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Avalon Strut, Rear Passenger Side
Part Number: 48530-80529
$141.69 MSRP: $200.58
You Save: $58.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Right Suspension Strut; Strut Assembly Kit; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-07120
- Position: Rear Passenger Side
- Replaces: 48530-09L50, 48530-09P40
- Part Name Code: 48530
- Item Weight: 1.40 Pounds
- Item Dimensions: 26.1 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80529
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Base, Limited, XL, XLS | 6 Cyl 3.5 L GAS

2008 Toyota Avalon Shock Absorber

Looking for affordable OEM 2008 Toyota Avalon Shock Absorber? Explore our comprehensive catalogue of genuine 2008 Toyota Avalon Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Avalon Parts Questions & Experts Answers

Q: How to remove the rear shock absorber with coil spring on 2008 Toyota Avalon?
A: The procedure to remove the rear shock absorber with coil spring starts with the removal of the rear seat cushion assembly then continues to the rear seat headrest plate cover LH and rear seat headrest assembly and the rear seatback assembly. First remove the rear wheel then use a jack for securing the front axle carrier. The process begins by unpacking the nut and removing the shock absorber stabilizer link from its position. Usage of a 5 mm hexagon wrench becomes necessary to stabilize the stud whenever the ball joint spins while using the nut. The shock absorber maintenance continues with the second step of hose flexible removal through its two bolts using a combination of torque wrenches to separate both the flexible hose and skid control sensor wire. The technician should loosen the two shock absorber nuts located at its lower section. However, the technician should not remove the two bolts or two nuts. Loosen the LH support suspension center nut while keeping it installed unless the shock absorber will get fully disassembled. You must first detach the 3 nuts then lower the rear axle carrier before using the last step to remove the shock absorber with coil spring by taking out the 2 bolts and 2 nuts from the lower shock absorber side.