How to install the lower ball joint assembly front LH and complete the subsequent steps on 2009 Toyota Avalon?

The installation process for the front LH lower ball joint assembly requires the steering knuckle connection using a castle nut with a torque setting at 123 Nm (1,250 kgf-cm, 91 ft-lbf) followed by new cotter pin installation; when the holes are not aligned correctly, increase the castles nut torque to 60 degrees. Move to the front axle assembly LH installation then add the front lower suspension arm. You should first install the front disc brake caliper assembly LH and the disc wheel afterward and finish by installing the tie rod assembly LH. Place the speed sensor front part followed by tightening the front axle hub LH nut. Add the front wheel followed by torqueing it to 103 Nm (1,050 kgf-cm, 76 ft-lbf). Perform checks on the front wheel alignment and verify the speed sensor signal.

OEM 2009 Toyota Avalon Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

View related parts
2009 Toyota Avalon Ball Joint, Front Passenger Side
Part Number: 43330-09810
$63.03 MSRP: $88.48
You Save: $25.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Right; Lower Ball Joint; Joint Assembly, Lower Ball, Front Passenger Side; Suspension Ball Joint
- Position: Front Passenger Side
- Replaces: 43330-09330
- Part Name Code: 43330K
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.4 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43330-09810
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Avalon Submodels:
- Base, Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Avalon Ball Joint, Front Driver Side
Part Number: 43340-09170
$62.56 MSRP: $87.81
You Save: $25.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Left; Lower Ball Joint; Joint Assembly, Lower Ball, Front Driver Side; Suspension Ball Joint
- Position: Front Driver Side
- Replaces: 43340-09040
- Part Name Code: 43340A
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.4 x 3.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43340-09170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Avalon Submodels:
- Base, Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2009 Toyota Avalon Ball Joint

Looking for affordable OEM 2009 Toyota Avalon Ball Joint? Explore our comprehensive catalogue of genuine 2009 Toyota Avalon Ball Joint. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Avalon Ball Joint Parts Q&A

Q: How to install the lower ball joint assembly front LH and complete the subsequent steps on 2009 Toyota Avalon?
A: The installation process for the front LH lower ball joint assembly requires the steering knuckle connection using a castle nut with a torque setting at 123 Nm (1,250 kgf-cm, 91 ft-lbf) followed by new cotter pin installation; when the holes are not aligned correctly, increase the castles nut torque to 60 degrees. Move to the front axle assembly LH installation then add the front lower suspension arm. You should first install the front disc brake caliper assembly LH and the disc wheel afterward and finish by installing the tie rod assembly LH. Place the speed sensor front part followed by tightening the front axle hub LH nut. Add the front wheel followed by torqueing it to 103 Nm (1,050 kgf-cm, 76 ft-lbf). Perform checks on the front wheel alignment and verify the speed sensor signal.