How to install the antenna cable sub-assembly and other related components on Scion tC?

Begin by attaching all clamps then sinking in the bolt before proceeding with the antenna cord sub-assembly installation. Install the instrument cluster finish panel assembly before adding the rear console box assembly then the console upper rear panel sub-assembly and the upper console panel. The shift lever knob sub-assembly should be installed on manual transaxle vehicles. Install the deck trim side panel assembly RH and No. 2 luggage compartment trim hook while also mounting the No. 1 side trim assembly RH combined with its respective No. 1 luggage compartment trim hook. Position the front door scuff plate on the right-hand side before placing the front seat outer belt assembly on the same side and wrapping up with the lap belt outer anchor cover installation. The work order involves the step-by-step installation of components such as the rear seatback assembly RH and the rear seat cushion assembly before proceeding with the front seat assembly and ending with the seat track bracket cover inner RH and outer RH. Complete the installation process with the rear No. 1 floor board and rope hook assembly and deck floor boxes RH and LH. The installation process includes the back door scuff plate together with the deck board sub-assembly and tonneau cover assembly. Finish the procedure by connecting the cable to the negative terminal and running the required initialization sequence when rebooting the systems which require it.

How to install the antenna cable while ensuring safety precautions for the SRS Air Bag system on Scion xB?

Service personnel must begin by studying warning notices about the SRS Air Bags since antenna cable installation affects this system. The installation process begins by installing the No. 2 antenna cord sub-assembly. Position the marking tapes of the antenna cord with the roof headlining markings and fix the antenna cord to the headlining through three new tape pieces. Use 6 new pieces of tape to arrange the antenna cord within the roof headlining cutout according to the markings before installing the remaining antenna cord section with an additional piece of tape. Installation of the antenna cord sub-assembly involves clamping it securely with 4 clips while connecting both connectors followed by torquing the bolt at 8.4 Nm. The installation sequence continues with fixture of the roof headlining. The connection sequence ends by fitting the cable to the negative terminal and tightening it to 5.4 Nm (55 kgf-cm, 48 in-lbf). Then check the SRS warning light.

OEM Scion Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Antenna Cables found

View related parts
Scion Cable, Rear
Part Number: 86101-74012
$19.41 MSRP: $27.01
You Save: $7.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
- Replaces: 86101-74010
Fits the following Scion Models:
- iQ | 2012 | Base | 4 Cyl 1.3 L GAS
View related parts
Scion Antenna Cable, Rear
Part Number: SU003-05232
$19.31 MSRP: $25.00
You Save: $5.69 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder Cord Assembly Rear; Antenna Cable, Rear; Feed Line; Cord Sub-Assembly, Antenna
- Position: Rear
Fits the following Scion Models:
- FR-S | 2015-2016 | Base | 4 Cyl 2.0 L GAS
View related parts
Scion Antenna Cable, Center
Part Number: SU003-05229
$21.09 MSRP: $27.30
You Save: $6.21 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder Cord Assembly Center; Antenna Cable, Center; Feed Line; Cord Sub-Assembly, Antenna
- Position: Center
- Replaces: SU003-02658
Fits the following Scion Models:
- FR-S | 2013-2016 | Base | 4 Cyl 2.0 L GAS
View related parts
Scion Antenna Cable, Rear
Part Number: SU003-02661
$19.31 MSRP: $25.00
You Save: $5.69 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Feeder Cord Assembly Rear; Antenna Cable, Rear; Feed Line; Cord Sub-Assembly, Antenna
- Position: Rear
Fits the following Scion Models:
- FR-S | 2013-2014 | Base | 4 Cyl 2.0 L GAS
View related parts
Scion Antenna Cable, Front
Part Number: 86101-12A40
$82.96 MSRP: $116.45
You Save: $33.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
Fits the following Scion Models:
- iM | 2016 | Base | 4 Cyl 1.8 L GAS
View related parts
Scion Antenna Cable, Rear
Part Number: 86101-WB003
$62.40 MSRP: $87.59
You Save: $25.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
Fits the following Scion Models:
- iA | 2016 | Base | 4 Cyl 1.5 L GAS
View related parts
Scion Antenna Cable, Rear
Part Number: 86101-12780
$94.79 MSRP: $133.06
You Save: $38.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
Fits the following Scion Models:
- iM | 2016 | Base | 4 Cyl 1.8 L GAS
View related parts
Scion Antenna Cable
Part Number: 86101-21240
$104.15 MSRP: $146.19
You Save: $42.04 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
Fits the following Scion Models:
- tC | 2011-2016 | Base | 4 Cyl 2.5 L GAS
View related parts
Scion Antenna Cable, Rear
Part Number: 86101-12700
$103.56 MSRP: $145.36
You Save: $41.80 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
Fits the following Scion Models:
- xB | 2008-2015 | Base | 4 Cyl 2.4 L GAS
View related parts
Scion Antenna Cable
Part Number: 86101-52050
$142.20 MSRP: $201.30
You Save: $59.10 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Cable
Fits the following Scion Models:
- xA | 2004-2006 | Base | 4 Cyl 1.5 L GAS
View related parts
Scion Antenna Cable
Part Number: 86101-52620
$103.79 MSRP: $145.70
You Save: $41.91 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
Fits the following Scion Models:
- xD | 2008-2014 | Base | 4 Cyl 1.8 L GAS
View related parts
Scion Antenna Cable
Part Number: 86101-21231
$143.57 MSRP: $203.25
You Save: $59.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Cable
- Replaces: 86101-21230
Fits the following Scion Models:
- tC | 2005-2010 | Base, Spec | 4 Cyl 2.4 L GAS
View related parts
Scion Antenna Cable
Part Number: 86101-21260
$79.62 MSRP: $111.76
You Save: $32.14 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
Fits the following Scion Models:
- tC | 2014-2016 | Base | 4 Cyl 2.5 L GAS
View related parts
Scion Antenna Cable
Part Number: 86101-21250
$90.74 MSRP: $127.37
You Save: $36.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
Fits the following Scion Models:
- tC | 2011-2013 | Base | 4 Cyl 2.5 L GAS
View related parts
Scion Antenna Cable, Front
Part Number: 82143-WB001
$86.34 MSRP: $121.19
You Save: $34.85 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire, Instrument Panel; Antenna Cable, Front; Cord Sub-Assembly, Antenna
- Position: Front
Fits the following Scion Models:
- iA | 2016 | Base | 4 Cyl 1.5 L GAS
View related parts
Scion Cable, Front
Part Number: 86101-74022
$79.55 MSRP: $111.65
You Save: $32.10 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
Fits the following Scion Models:
- iQ | 2013-2015 | Base | 4 Cyl 1.3 L GAS
View related parts
Scion Antenna Cable
Part Number: 86101-52640
$79.55 MSRP: $111.65
You Save: $32.10 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna
Fits the following Scion Models:
- xD | 2008-2014 | Base | 4 Cyl 1.8 L GAS
View related parts
Scion Cable, Front
Part Number: 86101-74021
$91.04 MSRP: $127.80
You Save: $36.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
Fits the following Scion Models:
- iQ | 2012 | Base | 4 Cyl 1.3 L GAS
View related parts
Scion Antenna Cable, Front
Part Number: 86101-12740
$79.55 MSRP: $111.65
You Save: $32.10 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
Fits the following Scion Models:
- xB | 2008-2015 | Base | 4 Cyl 2.4 L GAS
View related parts
Scion Cable, Rear
Part Number: 86101-74013
$17.05 MSRP: $23.73
You Save: $6.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
Fits the following Scion Models:
- iQ | 2013-2015 | Base | 4 Cyl 1.3 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

Scion Antenna Cable Parts and Q&A

Antenna Cable
86101-21231
Q: How to install the antenna cable sub-assembly and other related components on Scion tC?
A:
Begin by attaching all clamps then sinking in the bolt before proceeding with the antenna cord sub-assembly installation. Install the instrument cluster finish panel assembly before adding the rear console box assembly then the console upper rear panel sub-assembly and the upper console panel. The shift lever knob sub-assembly should be installed on manual transaxle vehicles. Install the deck trim side panel assembly RH and No. 2 luggage compartment trim hook while also mounting the No. 1 side trim assembly RH combined with its respective No. 1 luggage compartment trim hook. Position the front door scuff plate on the right-hand side before placing the front seat outer belt assembly on the same side and wrapping up with the lap belt outer anchor cover installation. The work order involves the step-by-step installation of components such as the rear seatback assembly RH and the rear seat cushion assembly before proceeding with the front seat assembly and ending with the seat track bracket cover inner RH and outer RH. Complete the installation process with the rear No. 1 floor board and rope hook assembly and deck floor boxes RH and LH. The installation process includes the back door scuff plate together with the deck board sub-assembly and tonneau cover assembly. Finish the procedure by connecting the cable to the negative terminal and running the required initialization sequence when rebooting the systems which require it.
Antenna Cable, Rear
86101-12700
Q: How to install the antenna cable while ensuring safety precautions for the SRS Air Bag system on Scion xB?
A:
Service personnel must begin by studying warning notices about the SRS Air Bags since antenna cable installation affects this system. The installation process begins by installing the No. 2 antenna cord sub-assembly. Position the marking tapes of the antenna cord with the roof headlining markings and fix the antenna cord to the headlining through three new tape pieces. Use 6 new pieces of tape to arrange the antenna cord within the roof headlining cutout according to the markings before installing the remaining antenna cord section with an additional piece of tape. Installation of the antenna cord sub-assembly involves clamping it securely with 4 clips while connecting both connectors followed by torquing the bolt at 8.4 Nm. The installation sequence continues with fixture of the roof headlining. The connection sequence ends by fitting the cable to the negative terminal and tightening it to 5.4 Nm (55 kgf-cm, 48 in-lbf). Then check the SRS warning light.

Related Scion Parts

Browse Scion Antenna Cable by Models

tC xB iQ xA xD FR-S iA iM