How to install the rear door lock assembly on 2009 Toyota Camry?

The first step for rear door lock assembly installation requires installing a new door lock wiring harness seal unless using the previously removed assembly while ensuring the surface free of grease or dust before seal attachment to avoid water entry and resulting failures. First perform rear door inside locking cable assembly installation by fixing the assembly to 3 claws before proceeding with the installation of rear door lock remote control cable assembly which needs its claw activated. Apply MP grease to the movable parts within the rear door lock assembly after which you should install the new door lock wiring harness seal. Secure the rear door lock assembly inside the release plate of the outside handle by ensuring it fits tightly against the frame of the outside handle plate. A "torx" socket wrench (T30) needs to install the assembly with 3 screws at 5.0 Nm (51 kgf-cm, 44 in-lbf) torque and after that join the connector. Installation should continue with the service hole cover and inner glass Weather Strip along with the inside handle sub-assembly and trim board sub-assembly and door assist grip cover and finally attaching the inside handle bezel plug.

OEM 2009 Toyota Camry Door Lock

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Door Locks found

View related parts
2009 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-0C060
$268.40 MSRP: $383.22
You Save: $114.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69030-06210
- Item Weight: 3.00 Pounds
- Item Dimensions: 8.1 x 5.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, L, LE, SE, SE Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Actuator, Driver Side
Part Number: 69040-0C050
$255.24 MSRP: $364.43
You Save: $109.19 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69040-06180
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.5 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69040-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Assembly, Front Door W/Motor, Passenger Side
Part Number: 69030-0C050
$267.82 MSRP: $382.39
You Save: $114.57 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Passenger Side; Door Lock Actuator Motor; Actuator; Lock
- Position: Passenger Side
- Replaces: 69030-06200
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.2 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Assembly, Rear
Part Number: 64610-33080
$54.84 MSRP: $76.34
You Save: $21.50 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Luggage Compartment Door; Deck Lid Latch, Rear; Door Lock Actuator; Trunk Latch; Door Lock; Lock
- Position: Rear
- Part Name Code: 64610
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.8 x 11.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 64610-33080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Actuator, Driver Side
Part Number: 69060-06100
$264.21 MSRP: $377.23
You Save: $113.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Left; Door Latch Assembly, Rear Left; Lock Assembly; Rear Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69060-33120
- Part Name Code: 69060A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.4 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69060-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69050-06100
$266.42 MSRP: $380.40
You Save: $113.98 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Right; Door Latch Assembly, Rear Right; Lock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69050-33120
- Part Name Code: 69050A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69050-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-42230
$267.82 MSRP: $382.39
You Save: $114.57 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor; Door Latch Assembly.
- Manufacturer Note: WIRELESS DOOR LOCK-WITH(PANIC BUTTON)&DOOR OUTSIDE HANDLE-BODY COLOR,W/O(PASSENGER KEY CYLINDER)&POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.0 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-42230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Assembly, Rear
Part Number: 64600-33120
$217.26 MSRP: $310.19
You Save: $92.93 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Luggage Compartment Door; Deck Lid Latch, Rear; Door Lock Actuator; Trunk Latch; Door Lock; Lock
- Position: Rear
- Part Name Code: 64610
- Item Weight: 2.40 Pounds
- Item Dimensions: 15.6 x 11.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 64600-33120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Assembly, Rear
Part Number: 64600-06010
$217.26 MSRP: $310.19
You Save: $92.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Luggage Compartment Door; Deck Lid Latch, Rear; Door Lock Actuator; Tailgate Lock; Trunk Latch; Door Lock; Lock
- Position: Rear
- Part Name Code: 64610
- Item Weight: 2.40 Pounds
- Item Dimensions: 15.9 x 11.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 64600-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Camry Door Lock

Looking for affordable OEM 2009 Toyota Camry Door Lock? Explore our comprehensive catalogue of genuine 2009 Toyota Camry Door Lock. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Camry Door Lock Parts Q&A

Q: How to install the rear door lock assembly on 2009 Toyota Camry?
A: The first step for rear door lock assembly installation requires installing a new door lock wiring harness seal unless using the previously removed assembly while ensuring the surface free of grease or dust before seal attachment to avoid water entry and resulting failures. First perform rear door inside locking cable assembly installation by fixing the assembly to 3 claws before proceeding with the installation of rear door lock remote control cable assembly which needs its claw activated. Apply MP grease to the movable parts within the rear door lock assembly after which you should install the new door lock wiring harness seal. Secure the rear door lock assembly inside the release plate of the outside handle by ensuring it fits tightly against the frame of the outside handle plate. A "torx" socket wrench (T30) needs to install the assembly with 3 screws at 5.0 Nm (51 kgf-cm, 44 in-lbf) torque and after that join the connector. Installation should continue with the service hole cover and inner glass Weather Strip along with the inside handle sub-assembly and trim board sub-assembly and door assist grip cover and finally attaching the inside handle bezel plug.

Related 2009 Toyota Camry Parts

Alternate Year Models

2008 Toyota Camry Door Lock 2010 Toyota Camry Door Lock