Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 69050-06100
Lock Actuator, Passenger Side

2007-2023 Toyota 6905006100

Customer Questions & Expert Answers (31)
Toyota 69050-06100 Lock Actuator, Passenger Side
Toyota 69050-06100 Lock Actuator, Passenger Side
Toyota 69050-06100 Lock Actuator, Passenger Side
Toyota 69050-06100 Lock Actuator, Passenger Side
  • Part Description
    Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Right; Door Latch Assembly, Rear Right
  • Part Name Code
    69050A
  • Position
    Passenger Side
  • Replaces
    69050-33120
  • Manufacturer
    Toyota
Make sure this part fits
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 69050-06100 Lock Actuator, Passenger Side is Ref No. 12 in the diagram below

    2009 Scion xB Lock Actuator, Passenger Side Diagram for 69050-06100
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 69050-06100

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code69050A
    Manufacturer Part Number69050-06100
    Part DescriptionLock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Right; Door Latch Assembly, Rear Right
    Other NamesLock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
    Item Dimensions8.2 x 5.8 x 5.7 inches
    Item Weight0.60 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces69050-33120
    ManufacturerToyota
    SKU69050-06100
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2015 Scion xBBase4 Cyl 2.4 L GAS
    2010-2023 Toyota 4Runner40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
    2007-2017 Toyota CamryBase, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
    2009-2013 Toyota CorollaBase, L, LE, S, XLE, XRS4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
    2022-2023 Toyota Corolla CrossHybrid S, Hybrid SE, Hybrid XSE, L, LE, XLE4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
    2008-2013 Toyota HighlanderBase, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
    2012-2019 Toyota Prius CFour, L, LE, One, Persona Series, Three, Two4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
    2012-2014 Toyota Prius VFive, Three, Two4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
    2021-2022, 2013-2018 Toyota RAV4Adventure, Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE, LE, Limited, Platinum, SE, TRD Off-Road, XLE, XLE Premium4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
    2021-2022 Toyota RAV4 PrimeSE, XSE4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
    View More

  • Customer Questions & Expert Answers

    Q:
    Is 69050-06100 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 69050-06100 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to remove the rear door lock actuator on Scion xB? Posted by Customer
    A:
    The first step for removing the rear door lock actuator requires disconnecting the negative battery terminal. The service begins with removing the rear door armrest base upper panel followed by inside handle bezel, trim board sub-assembly and glass inner Weather Strip and trim bracket alongside service hole cover, check assembly, Weather Strip and belt moulding assembly. The removal process consists of taking away the rear door glass run accompanied by the window division bar sub-assembly and quarter window Weather Strip as well as glass sub-assembly and window regulator sub-assembly. Using a "TORX" socket wrench T30 to remove the 3 screws allows you to move the rear door lock downward before pulling out the release plate from the rear door outside handle frame. The first step is to separate the door lock wire harness seal before you open the cover using a screwdriver with covered tip that frees the claw mechanism. Use the screwdriver to open the cover by removing the 3 claws following disconnection of the rear door lock remote control cable.
    Posted by ToyotaPartsNow Specialist
    Q:
    How do you remove the rear door lock for the 2008 Scion xB? Posted by Customer
    A:
    Use a "TORX" socket wrench T30 to take out the 3 screws, move the rear door lock downward, and pull the release plate out of the rear door outside handle frame.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What additional parts must be taken off to proceed with the removal for the 2010 Scion xB? Posted by Customer
    A:
    Take off the outer rear view mirror assembly, front door belt moulding assembly, front door trim bracket, front door service hole cover, front door glass sub-assembly, front door glass run, front door window regulator sub-assembly, front door frame rear lower sub-assembly, separation door stiffener cushion, and front door outside handle cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the installation process for the 2009 Scion xB? Posted by Customer
    A:
    Connect the cable to the negative battery terminal, torquing it to 5.4 Nm (55 kgf-cm, 48 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the first step to remove the power door lock actuator from the front door for the 2009 Scion xB? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be applied to the sliding parts of the front door lock assembly for the 2008 Toyota Camry? Posted by Customer
    A:
    Apply MP grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What are the next steps after removing the front door lock for the 2008 Scion xB? Posted by Customer
    A:
    Remove the front door lock open rod from the front door lock, take off the door lock wire harness seal, and remove the front door lock remote control cable.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to service and repair the power door lock actuator for the luggage compartment door for the 2010 Toyota Camry? Posted by Customer
    A:
    First, remove the luggage compartment door cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to service the power door lock actuator for the luggage compartment door for the 2009 Toyota Camry? Posted by Customer
    A:
    First, remove the luggage compartment door cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What needs to be installed after applying grease for the 2008 Scion xB? Posted by Customer
    A:
    The front door inside locking cable, engaging the 3 claws, and closing the cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be ensured when setting the lock to the rear door panel for the 2010 Scion xB? Posted by Customer
    A:
    Ensure that the rear door outside handle frame locks.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the next step after removing the front door lock assembly for the 2010 Toyota Camry? Posted by Customer
    A:
    Detach the front door lock open rod from the lock assembly, remove the door lock wiring harness seal, and take out the front door lock remote control cable assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the installation process for the 2008 Scion xB? Posted by Customer
    A:
    Connect the cable to the negative battery terminal, torquing it to 5.4 Nm (55 kgf-cm, 48 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What is the final step in the installation process for the 2009 Scion xB? Posted by Customer
    A:
    Connect the cable to the negative battery terminal with a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    How do you remove the front door lock assembly for the 2009 Toyota Highlander? Posted by Customer
    A:
    Use a "TORX" socket wrench (T30) to take out the 3 screws, slide the assembly downward, pull out the front door lock open rod from the outside handle frame, and remove the assembly and cables as a unit.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after installing the inside locking cable assembly for the 2009 Toyota Corolla? Posted by Customer
    A:
    Install the front door lock remote control cable assembly for both configurations.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be removed after the front door window regulator handle assembly for the 2009 Toyota Corolla? Posted by Customer
    A:
    Remove the front door inside handle bezel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after installing the inside locking cable assembly for the 2010 Toyota Camry? Posted by Customer
    A:
    Install the front door lock remote control cable assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be done if there is a power door lock when removing the rear door lock remote control cable assembly for the 2009 Toyota Corolla? Posted by Customer
    A:
    Use a screwdriver to disengage the claw (taping the screwdriver tip beforehand is recommended) and then remove the assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What steps should be taken if reusing the rear door lock assembly with the power door lock for the 2009 Toyota Corolla? Posted by Customer
    A:
    Replace the door lock wiring harness seal with a new one, avoiding grease or dust on the seal surface to prevent water intrusion, then apply MP grease, install the new seal, and follow the same installation steps as before, including connecting the connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    How many screws are used to install the assembly and what is the torque specification for the 2008 Toyota Camry? Posted by Customer
    A:
    Use 3 screws and apply a torque of 5.0 Nm (51 kgf-cm, 44 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be removed after the initial components for the 2008 Toyota Camry? Posted by Customer
    A:
    Remove the front No. 1 speaker assembly, service hole cover, glass sub-assembly, rear lower frame sub-assembly, and outside handle cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What tool is needed to remove the screws from the front door lock assembly for the 2009 Toyota Camry? Posted by Customer
    A:
    A "torx" socket wrench (T30) is needed to remove the 3 screws.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after applying grease for the 2009 Toyota Camry? Posted by Customer
    A:
    Install a new door lock wiring harness seal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be applied to the sliding parts of the front door lock assembly for the 2009 Toyota Highlander? Posted by Customer
    A:
    Apply MP grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to remove the power door lock actuator for the 2008 Toyota Highlander? Posted by Customer
    A:
    Disconnect the negative battery terminal and wait at least 90 seconds to prevent airbag and seat belt pretensioner activation.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be attached after the inside locking cable assembly for the 2009 Toyota Venza? Posted by Customer
    A:
    Attach the rear door lock remote control cable assembly and engage the claw.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    Q:
    What should be done with the door lock wiring harness seal for the 2009 Toyota Venza? Posted by Customer
    A:
    Remove it along with the front door lock remote control cable assembly from the front door lock assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after disengaging the claw for the 2009 Toyota Venza? Posted by Customer
    A:
    The rear door lock remote control cable assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you begin the installation of the front door lock assembly for the 2009 Toyota Venza? Posted by Customer
    A:
    Install the front door inside locking cable assembly to the front door lock assembly and engage the 3 claws.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Door Lock
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 69050-06100, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 69050-06100 Lock Actuator, Passenger Side. It is sometimes referred to as Toyota Door Lock, Toyota Door Lock Actuator, Toyota Rear Passenger Door Handle Latch, Toyota Door Latch Assembly. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 6905006100 Lock Actuator, Passenger Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery