How to install the rear door lock assembly on 2010 Toyota Camry?

Before installing the rear door lock assembly it is essential to install a new door lock wiring harness seal when using the recovered assembly because any dust or grease needs to avoid the attachment surface to stop water damage and prevent system breakdown. Start with the installation of the rear door inside locking cable assembly while activating three claws then move on to the rear door lock remote control cable assembly and use the claw to engage it. Place MP grease on the movable elements of the rear door lock assembly before putting in the new door lock wiring harness seal. Attach the rear door lock assembly into the rear door outside handle release plate before fixing it to the rear door panel while ensuring a strong connection between the outside handle frame release plate. Put the "torx" socket wrench (T30) to the rear door lock assembly installation through its 3 screws while applying 5.0 Nm (51 kgf-cm, 44 in-lbf) of torque before attaching the connector. Follow this step by adding the rear door service hole cover, rear door inside handle sub-assembly, rear door inner glass Weather Strip, rear door trim board sub-assembly and door assist grip cover and rear door inside handle bezel plug.

OEM 2010 Toyota Camry Door Lock

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Door Locks found

View related parts
2010 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-0C060
$268.40 MSRP: $383.22
You Save: $114.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69030-06210
- Item Weight: 3.00 Pounds
- Item Dimensions: 8.1 x 5.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, L, LE, SE, SE Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Lock Actuator, Driver Side
Part Number: 69040-0C050
$255.24 MSRP: $364.43
You Save: $109.19 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69040-06180
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.5 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69040-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Lock Assembly, Front Door W/Motor, Passenger Side
Part Number: 69030-0C050
$267.82 MSRP: $382.39
You Save: $114.57 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Passenger Side; Door Lock Actuator Motor; Actuator; Lock
- Position: Passenger Side
- Replaces: 69030-06200
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.2 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Lock Assembly, Rear
Part Number: 64610-33080
$54.84 MSRP: $76.34
You Save: $21.50 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Luggage Compartment Door; Deck Lid Latch, Rear; Door Lock Actuator; Trunk Latch; Door Lock; Lock
- Position: Rear
- Part Name Code: 64610
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.8 x 11.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 64610-33080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Lock Actuator, Driver Side
Part Number: 69060-06100
$264.21 MSRP: $377.23
You Save: $113.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Left; Door Latch Assembly, Rear Left; Lock Assembly; Rear Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69060-33120
- Part Name Code: 69060A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.4 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69060-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69050-06100
$266.42 MSRP: $380.40
You Save: $113.98 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Right; Door Latch Assembly, Rear Right; Lock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69050-33120
- Part Name Code: 69050A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69050-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-42230
$267.82 MSRP: $382.39
You Save: $114.57 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor; Door Latch Assembly.
- Manufacturer Note: WIRELESS DOOR LOCK-WITH(PANIC BUTTON)&DOOR OUTSIDE HANDLE-BODY COLOR,W/O(PASSENGER KEY CYLINDER)&POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.0 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-42230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Lock Assembly, Rear
Part Number: 64600-33120
$217.26 MSRP: $310.19
You Save: $92.93 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Luggage Compartment Door; Deck Lid Latch, Rear; Door Lock Actuator; Trunk Latch; Door Lock; Lock
- Position: Rear
- Part Name Code: 64610
- Item Weight: 2.40 Pounds
- Item Dimensions: 15.6 x 11.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 64600-33120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Lock Assembly, Rear
Part Number: 64600-06010
$217.26 MSRP: $310.19
You Save: $92.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Luggage Compartment Door; Deck Lid Latch, Rear; Door Lock Actuator; Tailgate Lock; Trunk Latch; Door Lock; Lock
- Position: Rear
- Part Name Code: 64610
- Item Weight: 2.40 Pounds
- Item Dimensions: 15.9 x 11.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 64600-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2010 Toyota Camry Door Lock

Looking for affordable OEM 2010 Toyota Camry Door Lock? Explore our comprehensive catalogue of genuine 2010 Toyota Camry Door Lock. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Camry Door Lock Parts Q&A

Q: How to install the rear door lock assembly on 2010 Toyota Camry?
A: Before installing the rear door lock assembly it is essential to install a new door lock wiring harness seal when using the recovered assembly because any dust or grease needs to avoid the attachment surface to stop water damage and prevent system breakdown. Start with the installation of the rear door inside locking cable assembly while activating three claws then move on to the rear door lock remote control cable assembly and use the claw to engage it. Place MP grease on the movable elements of the rear door lock assembly before putting in the new door lock wiring harness seal. Attach the rear door lock assembly into the rear door outside handle release plate before fixing it to the rear door panel while ensuring a strong connection between the outside handle frame release plate. Put the "torx" socket wrench (T30) to the rear door lock assembly installation through its 3 screws while applying 5.0 Nm (51 kgf-cm, 44 in-lbf) of torque before attaching the connector. Follow this step by adding the rear door service hole cover, rear door inside handle sub-assembly, rear door inner glass Weather Strip, rear door trim board sub-assembly and door assist grip cover and rear door inside handle bezel plug.

Alternate Year Models

2009 Toyota Camry Door Lock 2011 Toyota Camry Door Lock