How to install the front door lock assembly on 2008 Toyota Camry?

Start by replacing the door lock wiring harness seal with a new one before front door lock assembly installation only if using a previously removed assembly. During this step remove all trace of grease and dust from the surface where the seal attaches to prevent water damage and equipment failure. Start the installation with the front door inside locking cable assembly before securing the 3 claws on the assembly and proceed with adding the front door lock remote control cable assembly. The sliding parts of the front door lock assembly require application of MP grease before installing a new door lock wiring harness seal. The front door lock open rod should be inserted into the assembly before placing it into the front door outside handle frame to achieve proper locking. The front door lock assembly should receive three screws through use of a "torx" socket wrench (T30) which needs torquing to 5.0 Nm (51 kgf-cm, 44 in-lbf) before installer connects it to the cable routing. The installation process includes the sequence of front door outside handle cover, front door rear lower frame sub-assembly, front door glass sub-assembly, front door service hole cover, front No. 1 speaker assembly, front door inner glass Weather Strip, front door inside handle sub-assembly, front door trim board sub-assembly, courtesy light assembly, assist grip cover, front door inside handle bezel plug and front door lower frame bracket garnish.

OEM 2008 Toyota Camry Door Lock

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Door Locks found

View related parts
2008 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-0C060
$268.40 MSRP: $383.22
You Save: $114.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69030-06210
- Item Weight: 3.00 Pounds
- Item Dimensions: 8.1 x 5.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, L, LE, SE, SE Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Actuator, Driver Side
Part Number: 69040-0C050
$255.24 MSRP: $364.43
You Save: $109.19 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69040-06180
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.5 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69040-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Assembly, Front Door W/Motor, Passenger Side
Part Number: 69030-0C050
$267.82 MSRP: $382.39
You Save: $114.57 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Passenger Side; Door Lock Actuator Motor; Actuator; Lock
- Position: Passenger Side
- Replaces: 69030-06200
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.2 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Assembly, Rear
Part Number: 64610-33080
$54.84 MSRP: $76.34
You Save: $21.50 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Luggage Compartment Door; Deck Lid Latch, Rear; Door Lock Actuator; Trunk Latch; Door Lock; Lock
- Position: Rear
- Part Name Code: 64610
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.8 x 11.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 64610-33080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Actuator, Driver Side
Part Number: 69060-06100
$264.21 MSRP: $377.23
You Save: $113.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Left; Door Latch Assembly, Rear Left; Lock Assembly; Rear Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69060-33120
- Part Name Code: 69060A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.4 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69060-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69050-06100
$266.42 MSRP: $380.40
You Save: $113.98 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Right; Door Latch Assembly, Rear Right; Lock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69050-33120
- Part Name Code: 69050A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69050-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-42230
$267.82 MSRP: $382.39
You Save: $114.57 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor; Door Latch Assembly.
- Manufacturer Note: WIRELESS DOOR LOCK-WITH(PANIC BUTTON)&DOOR OUTSIDE HANDLE-BODY COLOR,W/O(PASSENGER KEY CYLINDER)&POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.0 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-42230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Assembly, Rear
Part Number: 64600-33120
$217.26 MSRP: $310.19
You Save: $92.93 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Luggage Compartment Door; Deck Lid Latch, Rear; Door Lock Actuator; Trunk Latch; Door Lock; Lock
- Position: Rear
- Part Name Code: 64610
- Item Weight: 2.40 Pounds
- Item Dimensions: 15.6 x 11.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 64600-33120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Assembly, Rear
Part Number: 64600-06010
$217.26 MSRP: $310.19
You Save: $92.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Luggage Compartment Door; Deck Lid Latch, Rear; Door Lock Actuator; Tailgate Lock; Trunk Latch; Door Lock; Lock
- Position: Rear
- Part Name Code: 64610
- Item Weight: 2.40 Pounds
- Item Dimensions: 15.9 x 11.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 64600-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Camry Door Lock

Looking for affordable OEM 2008 Toyota Camry Door Lock? Explore our comprehensive catalogue of genuine 2008 Toyota Camry Door Lock. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Camry Door Lock Parts Q&A

Q: How to install the front door lock assembly on 2008 Toyota Camry?
A: Start by replacing the door lock wiring harness seal with a new one before front door lock assembly installation only if using a previously removed assembly. During this step remove all trace of grease and dust from the surface where the seal attaches to prevent water damage and equipment failure. Start the installation with the front door inside locking cable assembly before securing the 3 claws on the assembly and proceed with adding the front door lock remote control cable assembly. The sliding parts of the front door lock assembly require application of MP grease before installing a new door lock wiring harness seal. The front door lock open rod should be inserted into the assembly before placing it into the front door outside handle frame to achieve proper locking. The front door lock assembly should receive three screws through use of a "torx" socket wrench (T30) which needs torquing to 5.0 Nm (51 kgf-cm, 44 in-lbf) before installer connects it to the cable routing. The installation process includes the sequence of front door outside handle cover, front door rear lower frame sub-assembly, front door glass sub-assembly, front door service hole cover, front No. 1 speaker assembly, front door inner glass Weather Strip, front door inside handle sub-assembly, front door trim board sub-assembly, courtesy light assembly, assist grip cover, front door inside handle bezel plug and front door lower frame bracket garnish.

Related 2008 Toyota Camry Parts

Alternate Year Models

2007 Toyota Camry Door Lock 2009 Toyota Camry Door Lock