How to remove the front door lock actuator on 2008 Toyota Camry?

The process of removing the front door lock actuator starts by removing a sequence of components including front door lower frame bracket garnish, inside handle bezel plug, assist grip cover, courtesy light assembly, trim board sub-assembly and inner glass Weather Strip and inside handle sub-assembly in that order. The front No. 1 speaker assembly along with the service hole cover and glass sub-assembly and rear lower frame sub-assembly and outside handle cover need removal. Apply a "torx" socket wrench (T30) to take out the 3 screws located on the front door lock assembly. Next disconnect the connector from this lock assembly before proceeding to remove the assembly from the front door. Users should slide the front door lock assembly downward then extract the front door lock open rod from the outside handle frame while taking out both units. Cable maintenance begins with detachments of front door lock open rod from its assembly before separating door lock wiring harness seal and taking out front door lock remote control cable assembly. The operation concludes with a screwdriver unwinding the three claws after taping its tip prior to execution followed by removing the front door inside locking cable assembly.

OEM 2008 Toyota Camry Door Lock Actuator

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Lock Actuators found

View related parts
2008 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-0C060
$258.04 MSRP: $368.42
You Save: $110.38 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69030-06210
- Item Weight: 3.00 Pounds
- Item Dimensions: 8.1 x 5.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, L, LE, SE, SE Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Actuator, Driver Side
Part Number: 69040-0C050
$254.66 MSRP: $363.60
You Save: $108.94 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69040-06180
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.5 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69040-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Assembly, Front Door W/Motor, Passenger Side
Part Number: 69030-0C050
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Passenger Side; Door Lock Actuator Motor; Actuator; Lock
- Position: Passenger Side
- Replaces: 69030-06200
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.2 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Actuator, Driver Side
Part Number: 69060-06100
$253.96 MSRP: $362.60
You Save: $108.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Left; Door Latch Assembly, Rear Left; Lock Assembly; Rear Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69060-33120
- Part Name Code: 69060A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.4 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69060-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69050-06100
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Right; Door Latch Assembly, Rear Right; Lock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69050-33120
- Part Name Code: 69050A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69050-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-42230
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor; Door Latch Assembly.
- Manufacturer Note: WIRELESS DOOR LOCK-WITH(PANIC BUTTON)&DOOR OUTSIDE HANDLE-BODY COLOR,W/O(PASSENGER KEY CYLINDER)&POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.0 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-42230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Camry Door Lock Actuator

Looking for affordable OEM 2008 Toyota Camry Door Lock Actuator? Explore our comprehensive catalogue of genuine 2008 Toyota Camry Door Lock Actuator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Camry Parts Questions & Experts Answers

Q: How to remove the front door lock actuator on 2008 Toyota Camry?
A: The process of removing the front door lock actuator starts by removing a sequence of components including front door lower frame bracket garnish, inside handle bezel plug, assist grip cover, courtesy light assembly, trim board sub-assembly and inner glass Weather Strip and inside handle sub-assembly in that order. The front No. 1 speaker assembly along with the service hole cover and glass sub-assembly and rear lower frame sub-assembly and outside handle cover need removal. Apply a "torx" socket wrench (T30) to take out the 3 screws located on the front door lock assembly. Next disconnect the connector from this lock assembly before proceeding to remove the assembly from the front door. Users should slide the front door lock assembly downward then extract the front door lock open rod from the outside handle frame while taking out both units. Cable maintenance begins with detachments of front door lock open rod from its assembly before separating door lock wiring harness seal and taking out front door lock remote control cable assembly. The operation concludes with a screwdriver unwinding the three claws after taping its tip prior to execution followed by removing the front door inside locking cable assembly.