How to remove the front door lock actuator on 2009 Toyota Camry?

The process to disassemble the front door lock actuator begins by removing the front door lower frame bracket garnish followed by inside handle bezel plug and assist grip cover and courtesy light assembly and front door trim board sub-assembly and inner glass Weather Strip alongside inside handle sub-assembly. The front service hole cover and glass sub-assembly must be eliminated next along with rear lower frame sub-assembly and front No.1 speaker assembly before the outside handle cover is exposed for removal. The connector for the front door lock assembly requires disconnection before removing the three screws with a "torx" socket wrench (T30). Lower the front door lock assembly while extracting the front door lock open rod through the outside handle frame to remove the assembly and its cables together. Remove the front door lock open rod off its position in the lock assembly while removing the door lock wiring harness seal and extracting the front door lock remote control cable assembly. The screwdriver procedure allows for removing the front door inside locking cable assembly after disengaging its 3 claws by taping the tool tip beforehand.

OEM 2009 Toyota Camry Door Lock Actuator

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Lock Actuators found

View related parts
2009 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-0C060
$258.04 MSRP: $368.42
You Save: $110.38 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69030-06210
- Item Weight: 3.00 Pounds
- Item Dimensions: 8.1 x 5.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, L, LE, SE, SE Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Actuator, Driver Side
Part Number: 69040-0C050
$254.66 MSRP: $363.60
You Save: $108.94 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69040-06180
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.5 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69040-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Assembly, Front Door W/Motor, Passenger Side
Part Number: 69030-0C050
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Passenger Side; Door Lock Actuator Motor; Actuator; Lock
- Position: Passenger Side
- Replaces: 69030-06200
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.2 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Actuator, Driver Side
Part Number: 69060-06100
$253.96 MSRP: $362.60
You Save: $108.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Left; Door Latch Assembly, Rear Left; Lock Assembly; Rear Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69060-33120
- Part Name Code: 69060A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.4 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69060-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69050-06100
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Right; Door Latch Assembly, Rear Right; Lock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69050-33120
- Part Name Code: 69050A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69050-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Lock Actuator, Passenger Side
Part Number: 69030-42230
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor; Door Latch Assembly.
- Manufacturer Note: WIRELESS DOOR LOCK-WITH(PANIC BUTTON)&DOOR OUTSIDE HANDLE-BODY COLOR,W/O(PASSENGER KEY CYLINDER)&POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.0 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-42230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Camry Door Lock Actuator

Looking for affordable OEM 2009 Toyota Camry Door Lock Actuator? Explore our comprehensive catalogue of genuine 2009 Toyota Camry Door Lock Actuator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Camry Parts Questions & Experts Answers

Q: How to remove the front door lock actuator on 2009 Toyota Camry?
A: The process to disassemble the front door lock actuator begins by removing the front door lower frame bracket garnish followed by inside handle bezel plug and assist grip cover and courtesy light assembly and front door trim board sub-assembly and inner glass Weather Strip alongside inside handle sub-assembly. The front service hole cover and glass sub-assembly must be eliminated next along with rear lower frame sub-assembly and front No.1 speaker assembly before the outside handle cover is exposed for removal. The connector for the front door lock assembly requires disconnection before removing the three screws with a "torx" socket wrench (T30). Lower the front door lock assembly while extracting the front door lock open rod through the outside handle frame to remove the assembly and its cables together. Remove the front door lock open rod off its position in the lock assembly while removing the door lock wiring harness seal and extracting the front door lock remote control cable assembly. The screwdriver procedure allows for removing the front door inside locking cable assembly after disengaging its 3 claws by taping the tool tip beforehand.