Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Scion xB Crankshaft Position Sensor

Engine Crankshaft Position Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

  • 2009 Scion xB Crankshaft Position Sensor - 90080-19014
    2009 Scion xB Crankshaft Position Sensor Diagram - 90080-19014
    View related parts

    2009 Scion xB Sensor, Camshaft Position

    Part Number: 90080-19014
    $66.23 MSRP: $79.06
    You Save: $12.83 (17%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
    • Replaces: 90919-05026
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 4.0 x 2.8 x 2.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90080-19014
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Scion xB Submodels:
    • Base | 4 Cyl 2.4 L GAS
  • 2009 Scion xB Crankshaft Position Sensor - 90919-05067
    2009 Scion xB Crankshaft Position Sensor Diagram - 90919-05067
    View related parts

    2009 Scion xB Crankshaft Position Sensor

    Part Number: 90919-05067
    $106.64 MSRP: $149.69
    You Save: $43.05 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
    • Manufacturer Note: *194
    • Part Name Code: 11301K
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 4.6 x 2.7 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90919-05067
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Scion xB Submodels:
    • Base | 4 Cyl 2.4 L GAS

2009 Scion xB Crankshaft Position Sensor

Looking for affordable OEM 2009 Scion xB Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2009 Scion xB Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion xB Parts Questions & Experts Answers

  • Q: How to install the crankshaft position sensor and generator assembly on 2009 Scion xB?
    A: First apply some engine oil onto the O-ring portion of the sensor before installing it with the torque at 9.0 Nm (90 kgf-cm, 80 in-lbf) while also maintaining the O-ring in its original position. The wire harness needs to be installed followed by the crankshaft position sensor connector clamp before connecting the sensor connector. The generator assembly requires installation via two bolts where Bolt A reaches 21 Nm (215 kgf-cm, 16 ft-lbf) torque and Bolt B reaches 52 Nm (530 kgf-cm, 38 ft-lbf). The generator wire must join terminal B after securing the nut to 9.8 Nm (100 kgf-cm, 87 in-lbf) followed by tethering the clamp before connecting the generator connector. You must fasten the two wire harness clamps before installing the fan and generator V belt. The engine under cover rear RH should be installed before connecting a cable at the negative battery terminal using a torque setting of 5.4 Nm (55 kgf-cm, 48 in-lbf). Check for evidence of oil leakage as the final protocol.

Related 2009 Scion xB Parts

Alternate Year Models

+
2008 Scion xB Crankshaft Position Sensor 2010 Scion xB Crankshaft Position Sensor