Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Scion xB Crankshaft Position Sensor

Engine Crankshaft Position Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

  • 2010 Scion xB Crankshaft Position Sensor - 90080-19014
    2010 Scion xB Crankshaft Position Sensor Diagram - 90080-19014
    View related parts

    2010 Scion xB Sensor, Camshaft Position

    Part Number: 90080-19014
    $66.23 MSRP: $79.06
    You Save: $12.83 (17%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
    • Replaces: 90919-05026
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 4.0 x 2.8 x 2.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90080-19014
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2010 Scion xB Submodels:
    • Base | 4 Cyl 2.4 L GAS
  • 2010 Scion xB Crankshaft Position Sensor - 90919-05067
    2010 Scion xB Crankshaft Position Sensor Diagram - 90919-05067
    View related parts

    2010 Scion xB Crankshaft Position Sensor

    Part Number: 90919-05067
    $106.64 MSRP: $149.69
    You Save: $43.05 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
    • Manufacturer Note: *194
    • Part Name Code: 11301K
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 4.6 x 2.7 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90919-05067
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2010 Scion xB Submodels:
    • Base | 4 Cyl 2.4 L GAS

2010 Scion xB Crankshaft Position Sensor

Looking for affordable OEM 2010 Scion xB Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2010 Scion xB Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xB Parts Questions & Experts Answers

  • Q: How to install the crankshaft position sensor and generator assembly on 2010 Scion xB?
    A: Use a light dose of engine oil on the O-ring before installing the sensor with the bolt clamped at 9.0 Nm (90 kgf-cm, 80 in-lbf) without twisting the O-ring. The wire harness installation occurs second before installing the crankshaft position sensor connector clamp. Finally, you should connect the crankshaft position sensor connector. When installing the generator assembly use two bolts, Bolt A should receive a torque of 21 Nm (215 kgf-cm, 16 ft-lbf) and Bolt B needs 52 Nm (530 kgf-cm, 38 ft-lbf) torque. The generator wire should be attached to terminal B through a nut torque of 9.8 Nm (100 kgf-cm, 87 in-lbf). Next connect the generator connector. The maintenance process starts with fitting the two wire harness clamps and proceeding to install the fan alongside the generator V belt. Fasten the engine under cover rear RH followed by cable connection to the negative battery terminal with 5.4 Nm (55 kgf-cm, 48 in-lbf). Check for any indications of oil escape as the final step.

Related 2010 Scion xB Parts

Alternate Year Models

+
2009 Scion xB Crankshaft Position Sensor 2011 Scion xB Crankshaft Position Sensor