OEM 2010 Scion xB Coolant Temperature Sensor

2010 Scion xB Parts Questions & Experts Answers

• Q: How to install the Engine Coolant Temperature Sensor on 2010 Scion xB?

  A: Installation of the Engine Coolant Temperature Sensor starts by applying a new gasket to the sensor followed by using Special Service Tool: 09817-33190 to install it with 20 Nm torque (204 kgf-cm, 14 ft-lbf). Next, connect the sensor connector. Before moving forward install the air cleaner case sub-assembly during assembly by tightening 3 bolts to 7.0 Nm (71 kgf-cm, 62 in-lbf) while also attaching the wire harness to this sub-assembly. Proceed with installing the air cleaner filter element sub-assembly after locking the air cleaner cap sub-assembly and air cleaner hose, then tighten the No. 1 air cleaner hose clamp. The No. 2 fuel vapor feed hose and No. 2 ventilation hose should be joined to the air cleaner hose. The vacuum switching valve assembly installation should include the wire harness connection while also connecting the mass air flow meter connector. Engine coolant should be added while conducting a leak inspection for the coolant system.